2025

1. Sandeep Kumar Pandey and Rajeev Nayan Gupta: "Antiwear and Extreme-pressure study of chemically modified castor oil with CuO, CeO2 and PTFE nanoparticles" 6th International Conference on Recent Advancements in Mechanical Engineering (ICRAME) (2025) NIT Silchar Others
2. Bidyananda Swargiary, Prakash Hazarika, Sudipta Halder, Pannalal Choudhry: "Vitrimer Synthesis from Waste Carbon Fibre Reinforced Polymer using Mechanochemical Process" International Conference on Recent Advancements in Mechanical Engineering (2025) National Institute of Technology, Silchar
3. Azmeera Lakshman, M.J.V.Krishneshwar, Swatantra Kumar, Sudipta Halder: "One-Pot Hydrothermal Synthesis of Magnetic Octahedral Fe3O4: Influence of NaOH Concentration on Crystal Size" International Conference on Recent Advancements in Mechanical Engineering (2025) National Institute of Technology, Silchar
4. Nitisha Shivam, Atraya Ashish Chetia, Swatantra Kumar,Ayush Deb, Sudipta Halder: "Synthesis and characterization of highly delaminated MXene and explore the thermoformability and shape memory characteristics in epoxy nanocomposite" International Conference on Recent Advancements in Mechanical Engineering (2025) National Institute of Technology, Silchar
5. Ayush Deb, Swatantra Kumar, Sudipta Halder, Pannalal Choudhry: "Investigating CNT with grafted dynamic covalent bond by varying weight into epoxy composites for mechanical stability" International Conference on Recent Advancements in Mechanical Engineering (2025) National Institute of Technology, Silchar
6. Dhruba Jyoti Das, Sudipta Halder, Khagokpam Gopal Krishna Singh: "Comparing Performance of etchant solutions for development of porous cenospheres via thermogravimetric analysis" International Conference on Recent Advancements in Mechanical Engineering (2025) National Institute of Technology, Silchar
7. Simma Bhargava Naidu, Yashwanth Kamasani, Subrata Barman, S. Dey: "Modulation of auxeticity of kirigami-inspired programmable metamaterials" International Conference on Recent Advances in Mechanical Engineering (ICRAME 2025) (2025) NIT Silchar, India
8. Avisek Tripathy, P K Karsh, S. Dey: "Multiple impact of composite hyperbolic shells – A finite element approach" International Conference on Recent Advances in Mechanical Engineering (ICRAME 2025) (2025) NIT Silchar, India
9. Subrata Barman, Kritesh Kumar Gupta, S. Dey: "Impact of nanovoid on mechanical behavior and deformation evolution of AlCoCrFeNi high-entropy alloy" International Conference on Recent Advances in Mechanical Engineering (ICRAME 2025) (2025) NIT Silchar, India

2024

1. Swarup De, Kalyan Chakraborty: "The machining parameter optimization during the machining of the Cr-Mn austenitic stainless steel" ELSEVIER 162-167 10.1016/j.matpr.2023.07.090 Scopus
2. Swarup De, Kalyan Chakraborty: "Some studies on the mechanism of chip formation during machining of Chromium Manganese austenitic stainless steel" MDPI 10.3390/engproc2024066032 Scopus
3. S. Alam, J. Das, A. Kalita, and S. Bhowmik: "Numerical analysis of the thermal properties of beeswax based phase change materials for thermal energy storage applications in comparison to paraffin" IEEE Region 10 Conference 2024 (TENCON 2024) (2024) Marina Bay Sands, Singapore IEEE Xplore 547 - 550 10.1109/TENCON61640.2024.10902926
4. Rajeev Nayan Gupta and Tej Pratap: "Role of Fatty Acid Composition of Green Oils on Triboperformance in Boundary Lubrication: An Experimental Study" 2nd International Conference on Recent Innovations & Developments in Mechanical Engineering (ICRIDME 2024) (2024) NIT Meghalaya Others
5. Sahidul Alam, and Sumit Bhowmik.: "Comparative Numerical Investigation of the Effectiveness of Beeswax Use as Phase Change Material in a Single Cylindrical Cell Model for the Thermal Control of Lithium-Ion Battery" 4th International Conference on Modeling, Simulation and Optimization (CoMSO 2024) (2024) NIT Silchar
6. Sahidul Alam, Jintu Das, Bornil Buragohain, and Sumit Bhowmik: "Numerical Investigation of the Variation in Temperature of Lithium-Ion Cell with Different Beeswax Thickness and Cell Radius and the Enclosure Thickness for Optimal Thermal Control" 4th International Conference on Modeling, Simulation and Optimization (CoMSO 2024) (2024) NIT Silchar
7. Ananya Kalita, Anurag Debnath and Sumit Bhowmik: "Investigation of Corrosion Resistance in Graphene Nanoplatelets and Jute Micro FillerReinforced Bio-epoxy Hybrid Composites" 2024 IEEE 8th Students Conference on Engineering and Systems (SCES) (2024) Department of Electrical Engineering, Motilal Nehru National Institute of Technology Allahbad, Prayagraj, India Best Paper Awarded
8. Ananya Kalita and Sumit Bhowmik: "Evaluation of the tribological behaviour of graphene nanoplatelets and Jute micro filler based bio-epoxy hybrid composites" International Conference on Sustainable Research in Energy and Environment (SREE)-2024 (2024) Department of Chemical Engineering & Centre for Energy and Environment, Dr B R Ambedkar National Institute of Technology Jalandhar, Punjab, India Best Presentation Award – Ananya Kalita
9. Tamanna Dey, Nibedita Debnath, Santosh Kumar, and Sumit Bhowmik: "Evaluation of the corrosion performance of a polymeric composite enhanced with rice husk filler" International Conference on Sustainable Research in Energy and Environment (SREE-2024) (2024) Department of Chemical Engineering & Centre for Energy and Environment, Dr B R Ambedkar National Institute of Technology Jalandhar, Punjab, India
10. Nibedita Debnath, Tamanna Dey, Santosh Kumar, and Sumit Bhowmik: "Investigation on the tribological characteristics of treated rice husk filler based bio-epoxy composites" International Conference on Sustainable Research in Energy and Environment (SREE-2024) (2024) Department of Chemical Engineering & Centre for Energy and Environment, Dr B R Ambedkar National Institute of Technology Jalandhar, Punjab, India
11. Atul Kumar, Devendra Kumar, Santosh Kumar, and Sumit Bhowmik: "Effect of Different Constraint on Tribological Behaviour of Banana Peel Reinforced Polymeric Composites Under Heated Contact Condition" International Conference on Sustainable Research in Energy and Environment (SREE-2024) (2024) Department of Chemical Engineering & Centre for Energy and Environment, Dr B R Ambedkar National Institute of Technology Jalandhar, Punjab, India
12. Ananya Kalita, Vijay Kumar Mahakur, and Sumit Bhowmik: "Numerical investigation of bamboo filler based epoxy polymer composites to evaluate its mechanical properties" 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2024) (2024) Department of Mechanical Engineering, NIT Silchar, Assam
13. Tamanna Dey, Santosh Kumar, and Sumit Bhowmik: "Assessment of the mechanical characteristics of a polymeric composite reinforced with rice husk filler" 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2024) (2024) Department of Mechanical Engineering, NIT Silchar, Assam
14. A. Siva Nagaraju, Rajat Gupta, and Sumit Bhowmik: "Experimental study on the Influence of Aspect Ratio and Triangular Dimple on Blades of H-Darrieus Wind Rotor on Self-Starting Capability" 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2024) (2024) Department of Mechanical Engineering, NIT Silchar, Assam
15. Ananya Kalita, Vijay Kumar Mahakur, and Sumit Bhowmik: "Numerical analysis of coir filler based polymeric composites for evaluating the flexural performance" 2nd International Conference on Mechanical Engineering (INCOM 2024) (2024) Department of Mechanical Engineering, Jadavpur University, Kolkata, West Bengal, India
16. Atul Kumar, Devendra Kumar, Santosh Kumar, and Sumit Bhowmik: "Corrosion performance of banana peel based epoxy polymer composite" 2nd International Conference on Mechanical Engineering (INCOM 2024) (2024) Department of Mechanical Engineering, Jadavpur University, Kolkata, West Bengal, India
17. B. P. Hazam, V.K. Mahakur, N. Chauhan, and S. Bhowmik: "Experimenatl and ANN evaluation on tribological performance of corn husk filler based composites" 2nd International Conference on Mechanical Engineering (INCOM 2024) (2024) Department of Mechanical Engineering, Jadavpur University, Kolkata, West Bengal, India
18. S. Purkayashta, S. Kumar, N. Chauhan, and S. Bhowmik: "The effects of treated rice-husk bio-filler at different weight fraction on tribological chracteristics of sustainable composites" 2nd International Conference on Mechanical Engineering (INCOM 2024) (2024) Department of Mechanical Engineering, Jadavpur University, Kolkata, West Bengal, India
19. S. K. Mehta, S. Pati: "Blue energy harvesting under the salinity gradient through ph-sensitive bio-inspired nanofluidic device" 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2024) (2024) NIT Silchar Springer, Singapore 10.1007/978-981-97-7535-4_26
20. D. Banerjee, S. Pati, P. Biswas: "Electric field induced flow fractionation in a microchannel with moving walls and hydrodynamic slippage" 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2024) (2024) NIT Silchar Springer, Singapore 10.1007/978-981-97-7535-4_23
21. S. Dutta, S. Pati: "Heatline and entropy generation analysis for natural convection within a rhombic enclosure with multiple heat sources" 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2024) (2024) NIT Silchar Springer, Singapore 10.1007/978-981-97-7535-4_43
22. S. Kumar , K. Chandra, S. Pati, P.R Randive: "Implication of fluid rheology on thermo-hydraulic transport characteristics through a triangular corrugated duct" 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2024) (2024) NIT Silchar Springer Singapore 10.1007/978-981-97-7535-4_44
23. L. C. Chetia, S. Pati, P. R. Randive: "Numerical investigation of droplet splitting in a branched t-shaped microchannel with varying contact angle" 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2024) (2024) NIT Silchar Springer Singapore 10.1007/978-981-97-7535-4_25
24. S. K. Mehta, A. Sarkar, S.Pati: "Ionic current rectification inside the nanochannel with pn-type polyelectrolyte layer: effect of solution ph" 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2024) (2024) NIT Silchar Springer Singapore 10.1007/978-981-97-7535-4_27
25. S. Kumar, S. Pati: "Effect of elliptical porous obstacle on hydrothermal performance for flow over a backward facing step channel" 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2024) (2024) NIT Silchar Springer, Singapore 10.1007/978-981-97-7535-4_37
26. S K Palateerdham, L N Phaneendra Peri, A Ingenito, Gautam Choubey: "Advances in mixing and combustion modelling in Supersonic flows" 75th International Astronautical Congress Milan, Italy International Astronautical Federation (IAF) https://doi.org/10.52202/078371-0056
27. Gautam Choubey, Gurkreetkaur Brar: "Computational study of combined fuel injection approaches in supersonic combustor" 2nd International Conference on Mathematical Modelling in Mechanics and Engineering (2024) Mathematical Institute, Belgrade, Serbia
28. S K Palateerdham, L N Phaneendra Peri, A Ingenito, Gautam Choubey: "Investigation of mixing and Combustion in supersonic flows" International Conference on High-Speed Vehicle Science and Technology (HISST 2024) Busan, South Korea
29. Krutarth Dalal, Veerendra Beeraka, Gautam Choubey: "A Brief Review on Advances in Strut-Based Fuel Injection and Flame Stabilization for Enhanced Scramjet Combustor Performance" 2nd International Conference on Emerging Aspects of Manufacturing, Thermal and Design Engineering (MATHED-2024) NIT Hamirpur, H.P., India. Scopus
30. Biswajit Mazumder, Lakshi Nandan Borah, Sudipta Halder, Pannalal Choudhury: "Fabrication of Epoxy Composites Using Functionalized TiO2 Nanoparticles: Experimental Investigation" International Conference on Recent Advancements in Mechanical Engineering (2024) National Institute of Technology, Silchar
31. Swatantra Kumar, Lakshi Nandan Borah, Sudipta Halder, Pannalal Choudhury: "A Review on Curing Study of Clay-Based Polymer Nanocomposites by Non-isothermal Differential Scanning Calorimetry" International Conference on Recent Advancements in Mechanical Engineering (2024) National Institute of Technology, Silchar
32. Lakshi Nandan Borah, Swatantra Kumar, Biswajit Mazumder, Sudipta Halder, Pannalal Choudhury: "Transformation of Natural Graphite to Ball-Milled Graphitic Nanoparticles (BMG) Featuring for Functionalization and Its Compatibility to Epoxy Network" International Conference on Recent Advancements in Mechanical Engineering (2024) National Institute of Technology, Silchar
33. Md Saruk Ahamed, Aman Singh, Sudipta Halder: "Evaluating Efficient Fracture Repair Strategies for Fiber-Reinforced Laminated Composites" International Conference on Recent Advancements in Mechanical Engineering (2024) National Institute of Technology, Silchar
34. Pohor Patric Debbarma, Praveen Kumar, Bipul Das: "Numerical modeling of laser material deposition method of AA1100 billet for in-situ repair of an exit hole in friction stir welding" 5th International Conference on Recent Advancements in Mechanical Engineering (2024) NIT Silchar
35. Praveen Kumar, Vishak AP, Bipul Das, Pohor Patric Debbarma: "Design and development of load member for measuring force and torque in friction stir welding process" 5th International Conference on Recent Advancements in Mechanical Engineering (2024) NIT Silchar
36. Ashimjyoti Chutia, Sonali Nag, Bipul Das: "Phase transformation modelling during the material deposition using friction stir additive manufacturing" 5th International Conference on Recent Advancements in Mechanical Engineering (2024) NIT Silchar
37. Alvina Das, Debangshu Das, Bipul Das: "Melting behaviour of the wire in induction heating based wire additive manufacturing" 5th International Conference on Recent Advancements in Mechanical Engineering (2024) NIT Silchar
38. Divyansh Singh, Abhishek Paul: "Enviroeconomic Analysis of Diesel Engine, Fuelled by Waste Cooking Oil and Waste Polyethylene Co-pyrolysis Oil-Diesel Blends" International Conference on Recent Advancements in Mechanical Engineering (2024) Department of Mechanical Engineering, NIT Silchar Springer Nature https://doi.org/10.1007/978-981-97-7535-4_70 Scopus
39. Subrata Bhowmik, Abhishek Paul & Rajsekhar Panua: "Hybrid ANN-MOGA-II-AHP Based Performance-Emission Optimization of Diesel-Ethanol Fueled CRDI Engine" International Conference on Recent Advancements in Mechanical Engineering (2022) Department of Mechanical Engineering, NIT Silchar Springer Nature https://doi.org/10.1007/978-981-97-0900-7_21 Scopus
40. Ashish Kumar Singh, Amos Thouaojam, S. Dey: "Effect of twist on uncertain natural frequency of composite spherical shells with cut-out" International Conference on Recent Advances in Mechanical Engineering (ICRAME 2024) NIT Silchar, India
41. Amos Thouaojam, Tanmoy Loha, S. Dey: "Non-local effect on random free vibration of carbon nanorods" International Conference on Recent Advances in Mechanical Engineering (ICRAME 2024) NIT Silchar, India
42. Subrata Barman, S. Dey: "Atomistic insight into nano-indentation behaviour of graphene coated Al0.3CoCrFeNi high entropy alloy composite" International Conference on Recent Advances in Mechanical Engineering (ICRAME 2024) NIT Silchar, India
43. B. B. de Moura, M. R. Machado, T. Mukhopadhyay, S. Dey: "Investigation of synthetic inductance for resonant shunt circuit applied to vibration control" IEEE CATCON 2024 Conference (2024) Jadavpur University, India

2023

1. Aby M. Philip, Kalyan Chakraborty: "The Johnson Cook model for the machinability study" 357-362 10.1016/j.matpr.2023.02.371 Scopus
2. Vikram Pandey, Kalyan Chakraborty: "The TOPSIS method to identify the optimal machining condition with reduced particle emission during machining of the Al-Si based 1%SiC reinforced nanocomposite material" ELSEVIER 341-345 10.1016/j.matpr.2022.11.383 Scopus
3. S. Santra, Alexander Farutin & Chaouqi Misbah: "“Electric field modulated spatial distribution of red blood cells in microflows”,“Dynamics of Capsules, Vesicles, and Cells in Flow”," Université de Technologie de Compiègne, France
4. S. Santra, Alexander Farutin & Chaouqi Misbah,: "“Confinement-triggered non-trivial dynamics of red blood cells under conjugateinterplay of electric field and poiseuille flow”, “HYDRODYNAMICS AT SMALL SCALES: from soft matter to bioengineering”" the University of Bordeaux, France
5. Sudhir Kumar, Pallab Sarmah, Rajeev Nayan Gupta: "Study of the Tribological Behavior of Aluminium-based Composites Fabricated Through Powder Metallurgy" 4th International Conference on Recent Advancements in Mechanical Engineering (ICRAME) (2023) NIT Silchar Others
6. A. S. Nagaraju, K. K. Sahastranshu, R. Gupta, S. Bhowmik, and A. R. Sengupta: "Experimental Analysis on Location and Number of Inward Triangular Dimples on NACA 4412 Profile in H-Darrieus Wind Turbine" 2nd International Conference on Recent Trends in Applied Sciences and Computing Engineering (RTASCE – 2023) (2023) VIT Bhopal University in Association with National Institute of Technology Warangal
7. Ananya Kalita, Vijay Kumar Mahakur, and Sumit Bhowmik: "Numerical analysis of coir filler-based polymer composites for evaluating the mechanical properties" 4th International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2023) (2023) Department of Mechanical Engineering, NIT Silchar, Assam
8. S. Bhowmik, U. Kumar, A. Kumar, and S. Kumar: "Effects of reinforcement particles loading on wear and friction behaviour of banana filler reinforced polymeric composites at different loading and sliding conditions" 4th International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2023) (2023) Department of Mechanical Engineering, NIT Silchar, Assam
9. Gautam Choubey, M. Solanki, Om Patel, and Sumit Tripathi: "LES study of two-strut-based supersonic combustor" 10th International and 50th National FMFP Conference IIT Jodhpur
10. Neeraj Baishya , Kaushik Das , Karan Roy, Helemoon Ahmed and Kalyan Chakraborty: "The elementary energy consumption during chip formation in machining" !st international conference on advancement in energy (2023) Motilal Nehru National Institute of Technology, Allahabad, Prayagraj-211004, U.P., India
11. Gayathri B., Vaishali, S. Dey: "Multiple impact responses of bending stiff composite plates – A finite element approach" ICRAME 2023 (2023) NIT Silchar, India
12. Ravi Kumar, Ojing Siram, Ujjwal K Saha, and Niranjan Sahoo: "Wind tunnel assisted analysis on the effect of span-wise separation of small wind turbines: A near wake region study" ASME Gas Turbine India Conference American Society of Mechanical Engineers V001T06A003
13. Mebratu Adamu Assegie, Ojing Siram, Pankaj Kalita, and Niranjan Sahoo: "Efficiency Assessment of Compressed Air Energy Storage System Coupled With Thermal Energy Storage Unit" ASME Gas Turbine India Conference American Society of Mechanical Engineers V001T03A004
14. Abdul Aziz Barbhuiya, Sudip Dey, Ashim Kuma Das: "Predicting financial manipulation of listed companies using machine learning techniques" Fourth International SEBI-NISM Research Conference on “Indian Securities Markets – The Next Agenda” during 02-03 March SEBI-NISM, Mumbai

2022

1. N. Bharat and K. Chakraborty: "The effect of process parameters on the additively formed built up edge during machining of EN24 steel" 20th ISME conference on advances in mechanical engineering, 19th- 21st May, 2022, Organized by Department of Mechanical Engineering, Indian Institute of Technology, Ropar, Punjab, India, in association with Indian Society of Mechanical Engineers (ISME) Others
2. Swarup De, Kalyan Chakraborty: "The machining behaviour of Cr-Mn austenitic stainless steel" ELSEVIER 10.1016/j.matpr.2022.12.131 Scopus
3. Aby M. Philip, Kalyan Chakraborty: "Some studies on the machining behavior of 316L austenitic stainless steel, Materials today" ELSEVIER 681-685 10.1016/j.matpr.2022.01.132 Scopus
4. Sudhir Kumar, Rajeev Nayan Gupta: "A Review on Fabrication and Properties of Magnesium Metal Matrix Composite Materials" 3rd International Conference on Recent Advancements in Mechanical Engineering (ICRAME) (2022) NIT Silchar Others
5. Vijay Kumar Mahakur, Rajdeep Paul, Santosh Kumar, Promod Kumar Patowari and Sumit Bhowmik: "A study on mechanical properties and tribological behaviour of jute filler composites" International Conference on Advanced Technologies for Societal Applications (ICATSA 2022) (2022) SVERIs College of Engineering, Pandharpur, Maharastra Conference Proceedings Techno-societal 2022 731–739 https://doi.org/10.1007/978-3-031-34644-6_75
6. Krushna Gouda and Sumit Bhowmik: "Development of thermal conductive paste for enhancing the heat transfer rate in electrical and electronic devices" 2nd International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME) (2022) Male, Maldives National University, Maldives 1 - 5 10.1109/ICECCME55909.2022.9988142 Scopus
7. Durgesh Kumar Mishra, Sumit Bhowmik and Krishna Murari Pandey: "A Review on Paraffin Phase Change Material-Based Thermal Management of Li-Ion Battery" ICFAMMT 2022: International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (2022) Department of Mechanical and Aerospace Engineering, IITRAM and SSME (SAC, ISRO) Ahmedabad, India Advances in Thermal Sciences 149 – 160 https://doi.org/10.1007/978-981-19-6470-1_13
8. Rajdeep Paul, Vijay Kumar Mahakur and Sumit Bhowmik: "Influence of Filler Support and Applied Load on the Wear Characteristics of the Bamboo Powder Supported Polymer Composite" 3rd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2022) (2022) Department of Mechanical Engineering, NIT Silchar, Assam Recent Advancements in Mechanical Engineering, Springer, Singapore 165 – 173 https://doi.org/10.1007/978-981-97-0900-7_13 Scopus
9. Santosh Kumar, Abir Saha, Kshounish Brahma and Sumit Bhowmik: "Numerical Analysis of Hemp Fiber Reinforced Epoxy Composites for Evaluating Micro-Mechanical Characteristics" 3rd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2022) (2022) Department of Mechanical Engineering, NIT Silchar, Assam Recent Advancements in Mechanical Engineering, Springer, Singapore 153 – 163 https://doi.org/10.1007/978-981-97-0900-7_12 Scopus
10. Geetakshi Teli and Sumit Bhowmik: "Influence of Filler Content on the Mechanical and Wear Properties of Hemp Filler Reinforced Polymer Matrix Composites" 3rd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2022) (2022) Department of Mechanical Engineering, NIT Silchar, Assam Recent Advancements in Mechanical Engineering, Springer, Singapore 145 – 151 https://doi.org/10.1007/978-981-97-0900-7_11 Scopus
11. G. Teli, Y. Mehra, D. Devi, A. Paul, A. Paul, and S. Bhowmik: "Surface modification of mercerized hemp fibres through electroless Ni-P coating" 1st International Conference in Fluid, Thermal and Energy Systems- 2022, ICFTES2022–ES–037 (2022) National Institute of Technology Calicut (Virtual), Kozhikode, India
12. Faladrum Sharma, Rahul Kumar and Sumit Bhowmik: "Response of Coconut Coir Filler-Reinforced Epoxy Composite Toward Cyclic Loading: Fatigue Property Evaluation" North-East Research Conclave (2022) IIT Guwahati Low Cost Manufacturing Technologies. NERC 2022, Springer, Singapore 201–219 https://doi.org/10.1007/978-981-19-8452-5_17
13. E. Tripathi, P. K. Patowari, S. Pati: "Numerical Investigations of Mixing Performance in Split and Recombine Micromixer" Second International Conference on “Recent Advances in Manufacturing” (RAM-2021) (2021) SVNIT Surat 10.1007/978-981-16-9952-8_12
14. Sujith T, S. K. Mehta, S. Pati: "Effect of finite size of ions on entropy generation characteristics for electroosmotic flow through microchannel considering interfacial slip" International Conference on Thermal Analysis and Energy Systems (ICTAES-2021) (2021) Heat Pump Research Institute, Coimbatore 10.1007/s10973-022-11731-8
15. S. Dutta, S. Pati, K. Ghosh: "Effects of Thermal boundary conditions in a Porous enclosure with Gambrel roofing-A numerical study" Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference (2021) IIT Madras 10.1615/IHMTC-2021.2440
16. S. K. Mehta, S. Pati, L. Baranyi: "Heat transfer and fluid flow analysis for electroosmotic flow of Carreau fluid through a wavy microchannel considering steric effect" Heat transfer and fluid flow analysis for electroosmotic flow of Carreau fluid through a wavy microchannel considering steric effect (2022) Budapest, Hungary
17. D. K. Deka, S. Pati, L. Baranyi: "Droplet spreading behaviour over a solid substrate mediated by surface wettability and interfacial tension" Conference on Modelling Fluid Flow (CMFF’22) (2022) Budapest, Hungary
18. Solanki, M., Bhatt, T., Kshitij, G., Gautam Choubey: "Effect of Divergence Angles on the Performance of a Cavity-Based Scramjet Combustor" DST-SERB (Sponsored) International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (ICFAMMT - 2022) IITRAM Ahmedabad LNME Springer Scopus
19. Majumder, R., Gautam Choubey: "Wettability Interaction on Two-Phase Flow in Microfluidic Flow-Focusing Geometry." DST-SERB (Sponsored) International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences IITRAM Ahmedabad Lecture Notes in Mechanical Engineering. Springer Scopus
20. Yadav, P.M., Bhojani, K., Gautam Choubey: "Effect of Variation of Free Stream Boundary Conditions on Flow Characteristics of Transverse Injection-Based Scramjet Combustor Equipped with Shock Generators" DST-SERB (Sponsored) International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences Scopus
21. Bordoloi, N., Pandey, K.M., Gautam Choubey: "A Review on the Selection of Materials and Heat Transfer Properties in Scramjet Engines." DST-SERB (Sponsored) International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (ICFAMMT - 2022) IITRAM Ahmedabad Scopus
22. Lakshi Nandan Borah, Chandrangith K P, Sudipta Halder: "Thermal characterization of polydopamine (Pd) based vitrimer polymer composites" 3rd International Conference on Recent Advancements in Mechanical Engineering (2022) National Institute of Technology, Silchar
23. Lakshi Nandan Borah, Sudipta Halder, Pannalal Choudhury: "High-energy planetary ball-milling of Graphite and characterization of milled graphite based CFRP laminates" International Conference on Advances in Chemical and Materials Sciences, ACMS-2022 (2022) Indian Institute of Chemical Engineers (IIChE), Kolkata
24. Lakshi Nandan Borah, Sudipta Halder, Pannalal Choudhury: "Mechanical characterization of CFRP laminates with graphitic based fillers produced by dry and wet ball milling method (Poster Presentation)" North-East Research Conclave Indian Institute of Technology, Guwahati, India
25. G G Giridhar, Pannalal Choudhury, Sudipta Halder and Lakshi Nandan Borah: "Hygrothermal properties of GFRPs infused with functionalized multi-walled carbon nanotubes(MWCNTs) (Poster Presenatation)" North-East Research Conclave, Indian Institute of Technology Guwahati, India (2022) Indian Institute of Technology, Guwahati, India
26. Chandrangith K P, Lakshi Nandan Borah, Sudipta Halder, Anubhav Saikia: "Tensile Characteristics of Polydopamine Based Vitrimer Polymer Composites (Poster presentation)" North-East Research Conclave, Indian Institute of Technology Guwahati, India (2022) Indian Institute of Technology, Guwahati, India
27. Sudipta Halder, Lakshi Nandan Borah, Chandrangith K P, Anubhav Saikia: "Tensile Characteristics of Polydopamine Based Vitrimer Polymer Composites (exhibition)" North-East Research Conclave, Indian Institute of Technology Guwahati, India (2022) Indian Institute of Technology, Guwahati, India
28. Angita Kar, Sarfaraz Hussain, Ashad Seikh, Aatish Kumar, Bipul Das: "Effect of plate placement on nugget shape in joining dissimilar thickness automotive steel thin sheets using resistance spot welding" COPEN 2022 (2022) IIT Kanpur
29. Dipak Debbarma, Krishna Murari Pandey & Abhishek Paul: "Impact of Secondary Channel Combined with Different Shaped Cavities and Ribs on Double Layer Microchannel Heat Sink" International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (2022) Institute of Infrastructure Technology Research and Management Springer Nature https://doi.org/10.1007/978-981-19-6470-1_2 Scopus
30. S. Kushari, S.R Maity, A. Chakraborty, S. Dey: "Stochastic First-Ply Failure Analysis of Laminated Composite Plate- A Moving Least Square Approach" 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME) (2022) National Institute of Technology Silchar
31. C.B. Kartik, S. Dey: "Stochastic Deflection Analysis of Laminated Composite Shells" International Conference on Recent Advances in Mechanical Engineering (ICRAME 2022) (2022) National Institute of Technology Silchar
32. Kritesh Kumar Gupta, L. Roy, S. Dey: "Machine Learning-Based Molecular Dynamics Simulations of Monolayered Graphene" Recent Advances in Computational and Experimental Mechanics Springer, Singapore (Vol II (pp. 251-263)),
33. Gayathri B., S. Dey: "Multiple Impact Responses of laminated Composite Plates" ISTAM 2022 (2022) Indian Institute of Technology Mandi
34. Subrata Barman, Kritesh Kumar Gupta, Ashish Kumar Singh, S. Dey: "Influence of alloying elements on mechanical deformation of AlCoCrFeNi High-Entropy Alloy" ISTAM 2022 (2022) Indian Institute of Technology Mandi
35. Suchita C Barhate, Ojing Siram, and Niranjan Sahoo: "Wake modelling of horizontal-axis wind turbines using sparse identification of non-linear dynamics (SINDY)" International conference Congress of the Indian Society of Theoretical and Applied Mechanics Springer Nature Singapore 69-82
36. Abdul Aziz Barbhuiya, A. K. Das, Sudip Dey: "Identifying financial statement manipulation using machine learning techniques: Opportunities and challenges" 3rd International Finance Conference during March 29-30 Centre for Management Studies (CMS) Jamia Millia Islamia, New Delhi, India
37. Singh, Deep, Rutupurna Choudhury, Yogesh Singh, and Santhakumar Mohan: "Design and Development of a Novel Rotary Actuator Based on Shape Memory Alloy and Permanent Magnet System" Asian Conference on Multibody Systems Lecture Notes in Mechanical Engineering. Springer, Singapore
38. Singh, Deep, Rutupurna Choudhury, and Yogesh Singh: "Robotic Systems Deployed to Combat COVID-19 Pandemic: A Review" ICRAME 2021 Lecture Notes in Mechanical Engineering. Springer, Singapore
39. Singh, Deep, Rutupurna Choudhury, Yogesh Singh, and Santhakumar Mohan: "Design and Development of a Novel Rotary Actuator Based on Shape Memory Alloy and Permanent Magnet System" Asian Conference on Multibody Systems Lecture Notes in Mechanical Engineering. Springer, Singapore

2021

1. Anoop K, Kalyan Chakraborty: "The optimal selection of machining parameters by TOPSIS method during machining of Inconel 718 (superalloy)," 36th Indian Engineering Congress (36 IEC), 26-27 December 2021, The institution of engineers, India, New Delhi 10.36375/prepare_u.iei.a166 Others
2. Sandip Saha, Pankaj Biswas, Sujit Nath: "A review on spectral element solver Nek5000" AIP Conference Proceedings 2336
3. G. Teli, V. K. Mahakur, R. Paul, and S. Bhowmik: "Wear analysis and prediction of tribological behaviour of alkaline treated hemp filler reinforced epoxy composite" 2nd Virtual International Tribology Research Symposium (ITRS 2021) (2021) SRM Institute of Science and Technology, India
4. Kshounish Brahma, Sumit Bhowmik, Krushna Gouda: "Investigation and Characterization of Coir Fiber Reinforced Polymer Composite Under Cyclic Loading" 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021) (2021) Department of Mechanical Engineering, NIT Silchar, Assam ecent Advancements in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore 377–387 https://doi.org/10.1007/978-981-19-3266-3_29
5. Sunil Kumar, Saikat Ranjan Maity, Lokeswar Patnaik, Sumit Bhowmik: "Parametric Optimization of Tribological Process Parameters and Their Comparative Effect on Wear Responses of TiCrN Coated Cold Work Tool Steel" 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021) (2021) Department of Mechanical Engineering, NIT Silchar, Assam Recent Advancements in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore 93–103 https://doi.org/10.1007/978-981-19-3266-3_8
6. Sujith T, S. K. Mehta, S. Pati: "Effect of non-uniform heating on electroosmotic flow through microchannel" International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020 (2020) NIT Silchar Springer, Singapore 10.1007/978-981-15-7711-6_50
7. S. K. Mehta, S. Pati: "Effect of non-uniform heating on forced convective flow through asymmetric wavy channel" International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020 (2020) NIT Silchar Springer, Singapore 10.1007/978-981-15-7711-6_34
8. A. Borah, S. Pati: "Effect of non-uniform asymmetric heating on forced convective conjugate heat transfer in a parallel plate microchannel" Proceedings of International Conference on Energy and Sustainable Development (2020) Jadavpur University and The Institution of Engineers, India Springer, Singapore 10.1007/978-981-15-7711-6_39
9. S. K. Mehta, S. Pati: "Thermo-Hydraulic Performance for an Electronic Cooling System Using Porous Material" Techno-Societal 2020: Proceedings of the 3rd International Conference on Advanced Technologies for Societal Applications (2020) SVERIs College of Engineering, Pandharpur, Maharashtra Springer, Cham 10.1007/978-3-030-69925-3_20
10. S. K. Mehta, S. Pati: "Analysis of Heat Transfer and Pressure Drop for Pressure Driven Flow of non-Newtonian Fluids through a Serpentine Channel: Influence of Prandtl Number" Techno-Societal 2020: Proceedings of the 3rd International Conference on Advanced Technologies for Societal Applications (2020) SVERIs College of Engineering, Pandharpur, Maharashtra Springer, Cham 10.1007/978-3-030-69925-3_92
11. S. Pabi, S. K. Mehta, S. Pati: "Effect of Slip on Vortex Formation near Two-Part Cylinder with Same Sign Zeta Potential in a Plane Microchannel" Techno-Societal 2020: Proceedings of the 3rd International Conference on Advanced Technologies for Societal Applications (2020) SVERIs College of Engineering, Pandharpur, Maharashtra 10.1007/978-3-030-69921-5_101
12. S. Dutta, S. Pati: "Influence of Thermal Radiation on Natural Convection in a Square Enclosure" Techno-Societal 2020: Proceedings of the 3rd International Conference on Advanced Technologies for Societal Applications (2020) SVERIs College of Engineering, Pandharpur, Maharashtra 10.1007/978-3-030-69925-3_51
13. B. Mondal, S. Pati, P. K. Patowari: "Serpentine square wave microchannel fabrication with WEDM and soft lithography" 3rd International Conference on Materials, Manufacturing and Modelling (ICMMM 2021) (2021) VIT Vellore 10.1016/j.matpr.2021.03.519
14. A. Kumar, S. K. Mehta, S. Pati: "Hydrodynamic and thermal transport characteristics for forced convective flow through a wavy channel with a linearly varying amplitude at the entrance region" International Conference on Thermal Analysis and Energy Systems (ICTAES-2021) (2021) Heat Pump Research Institute, Coimbatore
15. H. Dey, S. Pati, P. R. Randive: "Numerical Investigation of a Fin Enhanced Passive Thermal Management System for Cylindrical Li-ion Batteries" International Conference on Thermal Analysis and Energy Systems (ICTAES-2021) (2021) Heat Pump Research Institute, Coimbatore
16. D.Bhowmick, P.R. Randive, S. Pati: "Numerical Investigation on Effects of Swirl and Offset ratio on Thermo-hydraulic transport characteristics and Entropy generation of Turbulent Jet flow" International Conference on Thermal Analysis and Energy Systems (ICTAES-2021) (2021) Heat Pump Research Institute, Coimbatore
17. S. Chakravarthy, P. R. Randive, S. Pati: "Implication of injection angle and jet to crossflow ratio on the combustion characteristics of a scramjet combustor" International Conference on Thermal Analysis and Energy Systems (ICTAES-2021) (2021) Heat Pump Research Institute, Coimbatore 10.1177/09544089241253689
18. P. Patel, R. Karmur, Gautam Choubey, and S. Tripathi: "Analysis of Room Airflow Characteristics Using CFD Approach" A National e-conference on Recent Trends in Fluid Dynamics Research (RTFDR-21) NIT Rourkela LNME Springer Scopus
19. T. Patel, A. Naik, S. Patidar, Gautam Choubey, and S. Tripathi: "Dynamic Study of Bird Strike on Rigid Plate" A National e-conference on Recent Trends in Fluid Dynamics Research (RTFDR-21) LNME Springer Scopus
20. M Yadav, Gautam Choubey, S Tripathi: "Effect of different vortex generator configurations on the performance of ethylene-fuelled transverse injection-based scramjet combustor." A National e-conference on Recent Trends in Fluid Dynamics Research (RTFDR-21) NIT Rourkela LNME Springer Scopus
21. Mehdi Mehtab Mirad, Saka Abhijeet Rajendra, Jasper Ramon, Bipul Das: "Modal and Fatigue Analysis of Ultrasonic Machining Tool for Performance Analysis" International Conference on Modelling, Simulation and Optimization, 2021 (2021) NIT Silchar
22. Bipul Das, Jasper Ramon: "Machine learning and real-time signal features integration for strength modelling in friction stir welding process" International Conference on Recent Advances in Manufacturing (RAM 2021) (2021) SVNIT Surat
23. Mehdi Mehtab Mirad, Bipul Das: "Numerical analysis of tool material in ultrasonic machining process" International Conference on Recent Advances in Manufacturing (RAM 2021) (2021) SVNIT Surat
24. Dhiraj Raj, Saikat Ranjan Maity, Bipul Das: "Investigation of temperature distribution in low power laser cladding of nickel through numerical analysis" International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021) (2021) NIT Silchar
25. Mehdi Mehtab Mirad, Jiomani Talukdar, Bipul Das: "Analysis of tool defect in ultrasonic machining process through numerical modelling" International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021) (2021) NIT Silchar
26. Mehdi Mehtab Mirad, Sandip Mandal, Bipul Das: "Fabrication and evaluation of mechanical properties of stir cast AL6061 fly ash composite" International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021) (2021) NIT Silchar
27. P. Sandeep Varma, Subrata Bhowmik, Abhishek Paul, Pravin Ashok Madane & Rajsekhar Panua: "AI-Based ANN Modeling of Performance-Emission Profiles of CRDI Engine under Diesel-Karanja Strategies" International Conference on Recent Advancements in Mechanical Engineering (2020) Department of Mechanical Engineering, NIT Silchar Springer Nature https://doi.org/10.1007/978-981-15-7711-6_1 Scopus
28. Dipak Debbarma, K. M. Pandey & Abhishek Paul: "Enhancement of Thermal Performance of Microchannels Using Different Channel Wall Geometries: A Review" International Conference on Recent Advancements in Mechanical Engineering (2020) Springer Nature https://doi.org/10.1007/978-981-15-7711-6_87 Scopus
29. Himanshu Singh, Kritesh Kumar Gupta, S. Dey: "Astuting effect of stone-wall defect on mechanical characteristics of nanoporous and silicon dopant graphene" International Online Conference on Nano Materials (ICN 2021) (2021) Mahatma Gandhi University (India), Wroclaw University of Technology and Gdansk University of Technology (Poland) and Wuhan University (China)
30. S. Kushari, A. Chakraborty, T. Mukhopadhyay, S.R. Maity, S. Dey: "ANN-Based Random First-Ply Failure Analyses of Laminated Composite Plates" In Recent Advances in Computational Mechanics and Simulations Springer, Singapore
31. H. P. Raturi, Vaishali, S. Kushari, P. K. Karsh and S. Dey: "Moment independent sensitivity analysis of porous functionally graded plates subjected to free vibrations" XVI International Conference On Vibration Engineering & Technology Of Machinery (VETOMAC-2021) (2021) B. M. S. College of Engineering Bengaluru, Karnataka, India
32. Ojing Siram, Niranjan Sahoo, and Ujjwal K Saha: "Characterizing the transitional behavior of wind turbine wake from near to far wake regimes" ASME Power Conference American Society of Mechanical Engineers POWER2021-65959-V001T09A015 https://doi.org/10.1115/POWER2021-65959
33. Biswas, Shatarupa, Yogesh Singh, and Manidipto Mukherjee: "A Review on Importance of Dielectric Fluids for Electro Discharge Machining (EDM)" Recent Advances in Smart Manufacturing and Materials

2020

1. Saha S., Biswas P., Nath S.: "Numerical Modeling of Bifurcation and Leakage of Blood Flow in Mitral Valve to Predict Heart Malfunctioning" Intelligent Techniques and Applications in Science and Technology. ICIMSAT 2019 https://doi.org/10.1007/978-3-030-42363-6_80
2. Saha, S., Biswas, P., Nath, S.: "Bifurcation phenomena for incompressible laminar flow in expansion channel to study Coanda effect, Journal of Interdisciplinary Mathematics, Taylor and Francis" 10.1080/09720502.2020.1731962
3. Durgesh Kumar Mishra, Sumit Bhowmik, and Krishna Murari Pandey: "Numerical investigation of beeswax based phase change material for thermal management of li-ion battery" International Conference on Mechanical, Electronics and Computer Engineering 2020:Materials Science. (ICEMECE 2020) (2020) Kancheepuram, Tamilnadu, India Materials Today: Proceedings 6527-6532 https://doi.org/10.1016/j.matpr.2020.11.455 Scopus (7),
4. Durgesh Kumar Mishra, Sumit Bhowmik and Krishna Murari Pandey: "Experimental Investigations of Beeswax Based Composite Phase Change Material" International Conference in Recent Advances in Mechanical Engineering (ICRAME 2020) (2020) Department of Mechanical Engineering, NIT Silchar, Assam Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore 891–899 https://doi.org/10.1007/978-981-15-7711-6_88
5. D. Bhowmick, S. Chakravarthy, P. Randive, S. Pati: "Numerical investigation on the effect of magnetic field on natural convection heat transfer from a pair of embedded cylinders within a porous enclosure" International Mechanical Engineering Congress (IMEC-2019) (2019) NIT Tiruchirappalli 10.1007/s10973-020-09411-6
6. B. Mondal, S. Pati, P. K. Patowari: "Microchannel fabrication with pdms using developed mold by wire-cut electric discharge machining" International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020 (2020) NIT Silchar
7. D. K. Deka, G. C. Pal, S. Pati: "Numerical study of unsteady natural convection from a pair of cylinders in an enclosure with sinusoidal bottom wall" International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020 (2020) NIT Silchar
8. A. Chourasia, D. K. Deka, S. Pati: "Numerical analysis of steady natural convection from a heated cylinder within a square enclosure with sinusoidally heated bottom wall" International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020 (2020) NIT Silchar
9. S. Dutta, A. K. Biswas, S. Pati: "Numerical investigation of natural convection in rhombic porous enclosure saturated with copper water nanofluid with nonlinear heating at the bottom wall" International Conference on Advancements in Mechanical Engineering (ICAME 2020) (2020) Aliah University Kolkata
10. A. Borah, S. Pati: "Conjugate heat transfer analysis for flow through microduct subjected to non-uniform heating" International Conference on Recent Advancements in Mechanical Engineering (ICRAME-2020) (2020) NIT Silchar
11. B. Mondal, S. Pati, P. K. Patowari: "Assessment of mixing in microchannel with obstacles" International Conference on Energy and Sustainable Development, (ICESD 2020) (2020) Jadavpur University
12. Halder, Sudipta and Das, Subhankar: "Milled Graphite Nanoparticles, Silanization, Epoxy Composites, Mechanical, Fracture" 35th American Society for COmposites (ASC) Technical meeting, 2020 (2020) Virtual
13. Pannalal Choudhury; Subhankar Das; Sudipta Halder: "Graphene nano platelets, Glass fiber laminates, micro mechanical modeling" 35th American Society of Composites(ASC) Technical meeting, 2020 (2020) Virtual
14. Lakshi Nandan Borah, Kh. Gopal Krishna Singh, Sudipta Halder: "Encapsulated cenospheres having phase change material coated with poly-dopamine" International Conference on Recent Developments in Mechanical Engineering ICRAME 2020 (2020) National Institute of Technology, Silchar
15. Anirban Dutta, John Deb Barma, Bipul Das: "Mathematical modelling of wire electrical discharge machining process by applying response surface analysis" International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021) (2020) NIT Silchar
16. Vivek Kumar Mishra, Subrata Bhowmik, Abhishek Paul, Ajay Yadav & Rajsekhar Panua: "ANFIS Prediction of Performance and Exhaust Emission Characteristics of CRDI Engine Fueled with Diesel-Butanol Strategies" International Conference on Recent Advancements in Mechanical Engineering (2020) Department of Mechanical Engineering, NIT Silchar Springer Nature https://doi.org/10.1007/978-981-15-7711-6_2 Scopus
17. Anoop K, Kalyan Chakraborty: "Selection of Optimal Parameters Setting Through Taguchi -Fuzzy- FIS Simulation during Dry Turning of Inconel 718" International conference on engineering, technology, applied sciences, humanities & business management (ETAHBS 2020) (2020) Aryabhatt Institute of Technology, Govt. of NCT of Delhi, G.T. Karnal Road, Delhi 110033, India Krishi Sanskriti 41-46 (1),
18. Vaishali, S. Dey: "Effect of temperature on random natural frequency of functionally graded spherical shells – A PCE Approach" International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020 (2020) NIT Silchar, India
19. S. Kushari, A. Chakraborty, S.R Maity, S. Dey: "Probing predictability of random first ply failure load of composite plates" 65th Congress of ISTAM (Indian Society of Theoretical and Applied Mechanics) (2020) GITAM (Deemed to be university), Hyderabad
20. Himanshu Prasad Ratauri, Subrata Kushari, S. Dey: "Radial Basis function based first-ply failure analysis of composite spherical shells" International Conference on Recent Developments in Mechanical Engineering (ICRAME 2020) (2020) NIT Silchar, India
21. Vaishali, S. Dey: "Effect of thickness on probabilistic free vibration of hybrid FGsandwich cylindrical shells" First Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) (2020) Indian Institute of Technology Kharagpur, India
22. K. K. Gupta, L. Roy, S. Dey: "Machine learning based molecular simulations of monolayered graphene" First Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) (2020) Indian Institute of Technology Kharagpur, India
23. B. Roy, S. Dey: "Certainty of uncertainty in design of full cylindrical journal bearing, National Conference on Multidisciplinary Design" Analysis and Optimization (NCMDAO 2020) at Vikram Sarabhai Space Centre (VSSC) (2020) Indian Space Research Organization (ISRO), Thiruvananthapuram
24. S. Kushari, A. Chakraborty, T. Mukhopadhyay, S. R. Maity, S. Dey: "PNN based stochastic failure analysis of laminated composite plates" National Conference on Multidisciplinary Design, Analysis and Optimization (NCMDAO 2020) (2020) Vikram Sarabhai Space Centre (VSSC), Indian Space Research Organization (ISRO), Thiruvananthapuram
25. Ojing Siram and Niranjan Sahoo: "Characterizing the Helical Vortex Frequency of HAWT" Proceedings of the 7th International Conference on Advances in Energy Research Springer Singapore 611-620 https://doi.org/10.1007/978-981-15-5955-6_57
26. Singh, Deep, Rutupurna Choudhury, Yogesh Singh, and Manidipto Mukherjee: "Development and Workspace Analysis of Smart Actuation based Planar Parallel Robotic Motion Stage" Materials Science and Engineering
27. Singh, Deep, Rutupurna Choudhury, and Yogesh Singh: "Kinematic, Dynamic and Stiffness Analysis of an Asymmetric 2PRP-PPR Planar Parallel Manipulator" Advances in mechanical engineering
28. Singh, Akhileshwar, Yogesh Singh, and Krishna Murari Pandey: "A Review On Viscous Fingering Pattern Formation In Lifted Hele- Shaw Cell" Journal of Physics: Conference Series

2019

1. Vinyas M,Hemanth NR, Kattimani SC, Chethan VN: "Hygrothermal Response Analysis of MEE Beam Embedded In Adaptive Wood through FE Methods" AIP Conference Proceedings 2204, 040007 (2019) Bangalore, India https://doi.org/10.1063/1.5141580(ISSN=1551-7616)
2. Zeeshan, V. Kumar, S. Nath, D. Bhanja: "A Numerical Investigation on the Performance of Finned Tube Heat Exchangers Having Alternate Arrangements of Flat and Circular Tubes" International Conference on Applied Physics, Power and Material Science, Journal of Physics: Conf. Series 1172 (2019) 012057 10.1088/1742-6596/1172/1/012057
3. Rajdeep Paul, Krushna Gouda, and Sumit Bhowmik: "The effect of filler treatment on the frictional performance of coir dust reinforced polymeric composite" First International Conference on Advanced Trends in Mechanical and Aerospace Engineering, (ATMA-2019) (2019) Kudlu Gate, Bengaluru-560 068, India Materials Today: Proceedings 9079-9083 https://doi.org/10.1016/j.matpr.2021.05.391 Scopus (18),
4. Krushna Gouda, Rajdeep Paul, Sumit Bhowmik, and Biplab Das: "Tailoring the thermomechanical behaviour of epoxy with the incorporation of bamboo and graphite filler" First International Conference on Advanced Trends in Mechanical and Aerospace Engineering, (ATMA-2019) (2019) Kudlu Gate, Bengaluru-560 068, India Materials Today: Proceedings 9084-9088 https://doi.org/10.1016/j.matpr.2021.05.392 Scopus (18),
5. Rajdeep Paul, Krushna Gouda, and Sumit Bhowmik: "Effect of different operating parameters on tribological behaviour of bio-composite materials: A review" 12th International Conference on Sustainable Energy & Environmental Protection (SEEP 2019) (2019) University of Sharjah, UAE 124 – 131
6. Krushna Gouda, Sumit Bhowmik, and Biplab Das: "Tailoring the thermomechanical behavior of pristine epoxy with incorporation of ultra-sonicated bamboo and graphite filler" 12th International Conference on Sustainable Energy & Environmental Protection (SEEP 2019) (2019) University of Sharjah, UAE 229 – 334
7. Durgesh Kumar Mishra, Sumit Bhowmik and Krishna Murari Pandey: "Analysis on Development of Beeswax as Phase Change Material for Thermal Energy Storage" 4th International Conference on Emerging Trends in Mechanical & Industrial Engineering (ICETMIE 2019) (2019) The North Cap University, Gurugram, India Advances in Production and Industrial Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore 379–388 https://doi.org/10.1007/978-981-15-5519-0_29
8. Divya Zindani; Saikat Ranjan Maity; and Sumit Bhowmik: "Fuzzy-EDAS (Evaluation Based on Distance from Average Solution) for Material Selection Problems" 2nd International Conference on Computational Methods in Manufacturing (ICCMM 2019) (2019) Indian Institute of Technology Guwahati Advances in Computational Methods in Manufacturing. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore 755–771 https://doi.org/10.1007/978-981-32-9072-3_63
9. S. K. Mehta, S. Pati: "Thermo-hydraulic Analysis for Forced Convective Flow through Partially Filled Metallic Porous Wavy Channel Considering Dispersion Effect" 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019) (2019) IIT Roorkee
10. S. K. Mehta, S. Pati: "Numerical study of thermo-hydraulic characteristics for forced convective flow through wavy channel at different Prandtl number" International Mechanical Engineering Congress (IMEC-2019) (2019) NIT Tiruchirappalli
11. M. P. Boruah, P. Randive, S. Pati: "Conjugate Mixed Convection Heat Transfer in a Backward Facing Step Channel" 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019) (2019) IIT Roorkee
12. N. R. Nath, M. P. Boruah, S. Pati, P. Randive: "Thermophoretic effects on micro particles transport characteristics" 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019) (2019) IIT Roorkee
13. D. K. Deka, S. K. Mehta, S. Pati: "Natural Convection Heat Transfer in a Square Cavity with Porous Block of Different Aspect Ratio" 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019) (2019) IIT Roorkee
14. S. Chakravarthy, P. Randive, S. Pati: "Numerical analysis on the influence of jet inclination on the combustion characteristics of a scramjet combustor" International Mechanical Engineering Congress (IMEC-2019) (2019) NIT Tiruchirappalli
15. E. Tripathi, P. K. Patowari, S. Pati: "Fabrication of spiral micromixer using mold machined by Co2 assisted laser machine" International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019) (2019) IIT Indore
16. B. K. Kanchan, P. Randive, S. Pati: "Numerical investigation on the influence of reactant gas concentration on the performance of a PEM fuel cell" 7th International Conference on Advances in Energy Research (ICAER 2019) (2019) IIT Bombay Springer, Singapore 10.1007/978-981-15-5955-6_159
17. Subhankar Das, Sudipta Halder, Nazrul Islam Khan: "Surface Silanization of Recycled Chopped Carbon Fiber" International Journal of Engineering, ICRMR2019 Goa University
18. Pannalal Choudhury, Subhankar Das, Sudipta Halder: "Mechanical Characterization of Graphene Infused Hybrid GFRP Laminates" International Journal of Engineering, ICRMR 2019 Goa University
19. Bipul Das, Manebendra Das, Ashish Meena, Mehdi Mehtab Mirad: "Artificial intelligence based defect formation tendency prediction in friction stir welding" International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019) (2019) IIT Indore
20. Manabendra Das, Ashish Meena, Bipul Das: "Sensor fusion model for defect identification in friction stir welding process" 2nd International Conference on New Frontiers in Engineering Science & Technology (NFEST 2019) (2019) NIT Kurukshetra
21. Vaishali and S. Dey: "Effect of thickness on stochastic natural frequency of functionally graded spherical shells" 4th Indian Conference on Applied Mechanics (INCAM 2019) (2019) Indian Institute of Science Bangalore, India
22. P. K. Karsh, H. P. Raturi, R. R. Kumar, S. Dey: "Parametric uncertainty quantification in natural frequency of sandwich plates using polynomial neural network" Conference on Advanced Materials and Applications (NCAMA 2019) Materials Science and Engineering (2019) National Institute of Technology (NIT), Raipur, India
23. R. R. Kumar, K. M. Pandey, S. Dey: "Stochastic free vibration analysis of sandwich plates: A Radial basis function approach" International Conference on Reliability Safety and Hazard (ICRESH 2019) (2019) Indian Institute of Technology Madras, India
24. S. Saha, S. R. Maity, S. Dey: "Artificial neural network based uncertain material removal rate by turning" nternational Conference on Reliability Safety and Hazard (ICRESH 2019) (2019) Indian Institute of Technology Madras, India
25. T. Loha, Vaishali, S. Dey: "Stochastic nonlocal fundamental frequencies of single walled carbon nanorod – An artificial neural network approach" International Conference on Recent Advances in Composite Materials (ICRACM 2019) (2019) IIT- BHU, India
26. T. Loha, S. Dey: "Stochastic longitudinal vibration of single walled carbon nanorodsA non local elasticity approach" 2nd International Conference on Computational Methods in Manufacturing (ICCMM 2019) (2019) Indian Institute of Technology Guwahati, India
27. K. K. Gupta, S. Dey: "Effect of temperature on the fracture strength of perfect and defective monolayered graphene" 2nd International Conference on Computational Methods in Manufacturing (ICCMM 2019) (2019) Indian Institute of Technology Guwahati, India
28. R. P. Saw, S. Dey, S. Dutta: "Optimizing microhardness of electroless Ni-P coated copper substrate using PSO" Proceeding of International Conference on Applied Mechanical Engineering Research (IC-AMER 2019) (2019) National Institute of Technology Warangal, India
29. K.K. Gupta, A. Roy, S. Dey: "Comparative study of various defects in monolayer graphene using molecular dynamics simulation" Proceeding of International Conference on Applied Mechanical Engineering Research (IC-AMER 2019) (2019) National Institute of Technology Warangal, India
30. Vaishali and S. Dey: "Effect of thickness on stochastic natural frequency of functionally graded spherical shells" 4th Indian Conference on Applied Mechanics (INCAM 2019) (2019) Indian Institute of Science Bangalore, India
31. B. Roy, S. Dey: "Steady state behaviour of hydrodynamic journal bearings including random surface roughness" The 1st International Conference on Mechanical Power Transmission (ICMPT 2019) (2019) Indian Institute of Technology Madras, India
32. Vaishali and S. Dey: "Machine learning based thermal uncertainty on stochastic natural frequency of functionally graded cylindrical shells" 7th International Congress on Computational Mechanics and Simulation. (ICCMS 2019) (2019) Indian Institute of Technology Mandi, India
33. S. Kushari, A. Chakraborty, T. Mukhopadhyay, S.R. Maity, S. Dey: "ANN based random first-ply failure analyses of laminated composite plates" 7th International Congress on Computational Mechanics and Simulation (ICCMS 2019) (2019) Indian Institute of Technology Mandi, India
34. Vaishali and S. Dey: "Radial basis function based probabilistic dynamic stability of doubly curved shells" The 64th Congress of Indian Society of Theroretical and Applied Mechanics (ISTAM-2019) – An International Meet (2019) Indian Institute of Technology Bhubaneswar, India
35. Ojing Siram, and Niranjan Sahoo: "Near wake regime study on wind turbine blade tip vortex" ASME Gas Turbine India Conference American Society of Mechanical Engineers GTINDIA2019-2493-V002T06A012 https://doi.org/10.1115/GTINDIA2019-2493

2018

1. S. Santra, D.K Mandal, S. Chakrabarti: "“Effect of hyperlipidemia and hyperthermia on LDL species transportation in arterialwall layers”" 1st International Conference on Mechanical Engineering, Jadavpur University, INCOM18
2. Kashmiri Deka, Dipankar Bhanja, Sujit Nath: "Fundamental solution of steady and transient bio heat transfer equations especially for skin burn and hyperthermia treatments" Heat Transfer – Asian Research, Wiley 10.1002/htj.21388 ESCI, ISSN: 1523-1496
3. S. Dutta, A. K. Biswas, S. Pati: "Numerical Analysis of Laminar Natural Convection in a Quadrantal Cavity with Non-uniform heating of Bottom Wall" 1st International Conference on Mechanical Engineering (2018) Jadavpur University
4. D. Bhowmick, V. Singh, P. Randive, S. Pati: "Combined Effects of Offset Ratio and Geometrical configuration on Thermo-hydraulic Transport Characteristics of Turbulent Jet" International Conference on Thermal Analysis and Energy Systems (ICTASE 2018) (2018) Hindusthan College of Engineering and Technology, Coimbatore
5. S. K. Mehta, S. Pati: "Thermo-hydraulic analysis for flow through triangular corrugated channel" International Conference on Thermal Analysis and Energy Systems (ICTASE 2018) (2018) Hindusthan College of Engineering and Technology, Coimbatore
6. A. Borah, N. Deka, S. Pati: "Effect of non-uniform heating on entropy generation for thermally developing flow between parallel plates" Fifth International Conference on Computational Methods for Thermal Problems THERMACOMP2018 (2018) Indian Institute of Science, Bangalore
7. S. K. Mehta, S. Pati: "Effect on non-uniform heating on heat transfer characteristics in wavy channel" Fifth International Conference on Computational Methods for Thermal Problems THERMACOMP2018 (2018) Indian Institute of Science, Bangalore
8. D. Bhowmick, P. Randive, S. Pati: "Effect of thickness of porous layer on thermo-hydraulic characteristics and entropy generation in a partially porous wavy channel" International Conference on Recent Innovations and Developments in Mechanical Engineering( IC-RIDME 2018) (2018) NIT Meghalaya
9. D. Bhowmick, P. Randive, S. Pati: "Numerical Investigation on Influence of Porous Layer on Fluid Flow and Heat Transfer Characteristics in a Partially Porous Wavy Channel" 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (2018) IIT Bombay
10. Chiranjib Bhowmik, Sumit Bhowmik and Amitava Ray: "Selection of green energy sources: an entropy-topsis Approach" 1st International Conference on Mechanical Engineering (INCOM18) (2018) Department of Mechanical Engineering, Jadavpur University Kolkata India 658 – 661
11. N. Kakoti, R. Sethi, S. Agarwal, D. Zindani, and S. Bhowmik: "Study of tensile behaviour of bamboo epoxy composites using finite element method" 1st International Conference on Mechanical Engineering (INCOM18) (2018) Department of Mechanical Engineering, Jadavpur University Kolkata India 43 – 46
12. Rahul Kumar, Gaurav Kumar and Sumit Bhowmik: "Synthesis and Responsive Study of Tensile and Flexural Properties of Bamboo Filler Based Functionally Graded Composite" International Conference on Recent Innovations and Developments in Mechanical Engineering (ICRIDME 2018) (2018) Department Mechanical Engineering, NIT Meghalaya Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering, Springer, Singapore 373–384 https://doi.org/10.1007/978-981-15-0124-1_33
13. Divya Zindani; Saikat Ranjan Maity; and Sumit Bhowmik: "An Integrated Fuzzy-Based Methodology for Selection of Casting Pattern Material" 3rd international conference in Soft Computing: Theories and Applications (SoCTA 2018) (2018) Dr. B R Ambedkar National Institute of Technology, Jalandhar, Punjab Soft Computing: Theories and Applications. Advances in Intelligent Systems and Computing, Springer, Singapore 291–299 https://doi.org/10.1007/978-981-15-0751-9_27
14. Chiranjib Bhowmik, Divya Zindani, Sumit Bhowmik and Amitava Ray: "Sustainable Supplier Selection Using Combined Thinking Process" 3rd international conference in Soft Computing: Theories and Applications (SoCTA 2018) (2018) Dr. B R Ambedkar National Institute of Technology, Jalandhar, Punjab Soft Computing: Theories and Applications. Advances in Intelligent Systems and Computing, Springer, Singapore 281–289 https://doi.org/10.1007/978-981-15-0751-9_26
15. S. Dutta, A. K. Biswas, S. Pati: "Heat transfer enhancement of copper-water nanofluids in a rhombic wavy wall enclosure" 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (2018) IIT Bombay
16. M. P. Boruah, A. Sarker, P. Randive, S. Pati: "Effect of Capillarity-Viscosity Interaction on Coalescence of Droplets in a Confined Channel" 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (2018) IIT Bombay
17. B. Mondal, S. Pati, P. K. Patowari: "Effect of Confluence Angle between Inlets on the Mixing Characteristics in Microchannel" 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (2018) IIT Bombay
18. D. K. Deka, S. Pati: "Effect of Free-stream Parameters on Impinging Shock Wave Boundary Layer Interaction (SWBLI) on a Flat Plate" 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (2018) IIT Bombay
19. S. K. Mehta, A. Kumar, S. Pati: "Numerical Analysis of Thermo-Hydraulic Transport Characteristics in Wavy Channel with Porous Wavy Slab" 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (2018) IIT Bombay
20. B. Mondal, S. Pati, P. K. Patowari: "Influence of confluence angle between inlets on the mixing performance of micromixer with obstacles" Techno Societal- 2018, 2nd International Conference on Advanced Technologies for Societal Application SVERIs College of Engineering, Pandharpur, Maharashtra
21. B. Mondal, S. Pati, P. K. Patowari: "Numerical analysis of mixing performance in microchannel with different ratio of outlet to inlet width" Techno Societal- 2018, 2nd International Conference on Advanced Technologies for Societal Application (2018) SVERIs College of Engineering, Pandharpur, Maharashtra
22. Nazrul Islam Khan, Sudipta Halder, Subhankar Das, M.S. Goyat: "Parametric influence towards size reduction of poly(methylmethacrylate) shelled microcapsule with epoxy core" Materials Today Proceeding, International Conference on Composite Materials and Structures, (ICMS) 2017 (2017) Indian Institute of Technology, Hyderabad
23. Subhankar Das, Nazrul Islam Khan, Sudipta Halder: "Thermo-mechanical stability of epoxy composites induced with surface silanized recycled carbon fibers" 1st International Conference on Mechanical Materials and Renewable Energy (ICMMRE 2017) (2017) Sikkim Manipal Institute of Technology, Majhitar, Sikkim, India 10.1088/1757-899X/377/1/012172
24. N I Khan, S Halder, S B Gunjan and T Prasad: "A review on Diels-Alder based self-healing polymer composites" IOP Conference Series: Materials Science and Engineering (2017) Sikkim Manipal Institute of Technology, Majhitar, Sikkim, India 10.1088/1757-899X/377/1/012007
25. Bipul Das, Sukhomay Pal, Swarup Bag: "Weld defect identification in friction stir welding using power spectral density" International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017) (2017) Dubai (UAE) IOP Science 1-7 10.1088/1757-899X/346/1/012049 Scopus
26. P.K. Karsh, T. Mukhopadhyay, S. Dey: "A stochastic investigation of effect of temperature on natural frequencies of functionally graded plates" International conference on Trends and Recent Advances in Civil Engineering (2018) Amity University Noida, India
27. P. K. Karsh, S. Dey: "Stochastic natural frequencies of functionally graded plates based on power law index" International Conference on Computational Mathematics in Nanoelectronics and Astrophysics (CMNA 2018) (2018) Indian , Institute of Technology Indore, India
28. R. R. Kumar, K. M. Pandey, S. Dey: "Radial basis function based probabilistic buckling behaviour of sandwich plates" International Conference on Computational Mathematics in Nanoelectronics and Astrophysics (CMNA 2018) (2018) Indian Institute of Technology Indore, India

2017

1. Rajeev Nayan Gupta and A.P.Harsha: "Antiwear performance of chemically modified sunflower oil with CeO2 nanoparticle as an additive" 9th International Conference on Industrial Tribology (ICIT-2017) (2017) Kolkata Others
2. Rajeev Nayan Gupta and A.P.Harsha: "Tribological evaluation of calcium-copper-titanate and cerium oxide nano-additives in paraffin oil" World Tribology Conference (WTC-2017) (2017) Beijing, China Others
3. Rahul Kumar; Chaldiganipalle Bhargav; and Sumit Bhowmik: "Bamboo fibre reinforced thermoset and thermoplastic polymer composites: A short review" Renewable Energy Technologies: Issues and Perspectives (RETIP 2017) (2017) NIT Silchar, Assam AIP Conference Proceedings: RENEWABLE ENERGY TECHNOLOGIES: Issues and Perspectives (RETIP 2017) https://doi.org/10.1063/1.5049114 (1),
4. Jagadish; Sumit Bhowmik; Amitava Ray; and Maran Rajakumaran: "Optimization of Process Parameters using Fuzzy-Grey Relational Analysis (F-GRA) for Green EDM" Renewable Energy Technologies: Issues and Perspectives (RETIP 2017) (2017) NIT Silchar AIP Conference Proceedings: RENEWABLE ENERGY TECHNOLOGIES: Issues and Perspectives (RETIP 2017) https://doi.org/10.1063/1.5049107
5. Jagadish; Sumit Bhowmik; Amitava Ray; and Suresh Gudala: "Cutting fluid selection for environmentally conscious design for manufacturing: An integrated theory" Renewable Energy Technologies: Issues and Perspectives (RETIP 2017) (2017) NIT Silchar AIP Conference Proceedings: RENEWABLE ENERGY TECHNOLOGIES: Issues and Perspectives (RETIP 2017) https://doi.org/10.1063/1.5049106
6. Divya Zindani; Saikat Ranjan Maity; and Sumit Bhowmik: "Selection of material for wind turbine blade using PROMETHEE-GAIA method" Renewable Energy Technologies: Issues and Perspectives (RETIP 2017) (2017) NIT Silchar AIP Conference Proceedings: RENEWABLE ENERGY TECHNOLOGIES: Issues and Perspectives (RETIP 2017) https://doi.org/10.1063/1.5049104
7. S. Dutta, A. K. Biswas, S. Pati: "Effects of non-uniform heating on natural convection within rhombic enclosures: A numerical study" 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017) (2017) BITS Pilani Hyderabad
8. Chaiki Malakar, and Sumit Bhowmik: "Assessment of Optimal Drilling Parameter for Bamboo Filler Reinforced Epoxy Composite" 10th International Conference on Sustainable Energy and Environmental Protection (SEEP 2017) (2017) Bled, Slovenia 101 – 111 10.18690/978-961-286-057-8
9. Shrikrushna B. Bhosale, Sumit Bhowmik, and Amitava Ray: "Multi Criteria Decision Making For Selection Of Material Composition For Powder Metallurgy Process" 7th International Conference on Materials Processing and Characterization (ICMPC 2017) (2017) GRIET, Hyderabad, Telangana in collaboration with MANIT, Bhopal, M.P Materials Today: Proceedings 4615-4620 https://doi.org/10.1016/j.matpr.2017.12.032 (2),
10. Chiranjib Bhowmik, Abhinandan Baruah, Sumit Bhowmik and Amitava Ray: "Green energy sources selection for sustainable energy planning using multi-criteria decision-making approach" International Conference on Mechanical, Materials and Renewable Energy (2017) Sikkim Manipal Institute of Technology, Sikkim, India IOP Conference Series: Materials Science and Engineering 1 - 8 10.1088/1757-899X/377/1/012029
11. Gautam Choubey, K.M Pandey: "Effect of strut + wall injection techniques on the flow- field of circular-shaped multi-strut scramjet combustor" 10th International conference on Sustainable Energy and Environmental Protection (SEEP 2017) Bled-Slovenia Scopus
12. Ambarish Maji, Gautam Choubey: "Microstructure and Mechanical Properties of Alumina Toughened Zirconia (ATZ)" IMME 2017 NIT Trichy Materials Today: Proceedings Scopus
13. Gautam Choubey, K.M Pandey, A. Maji, T. Deshamukhya: "A brief review on the recent advances in scramjet engine" International Conference on Functional Materials, Characterization, Solid State Physics, Power, Thermal and Combustion Energy (FCSPTC-2017) Andhra Pradesh, India AIP Conference Proceedings, (AIP) Scopus
14. A. Maji, D. Bhanja, P.K. Patowari, Gautam Choubey and T. Deshamukhya: "Computational Investigation of Heat Transfer Analysis through Perforated Pin Fins of Different Materials" International Conference on Functional Materials, Characterization, Solid State Physics, Power, Thermal and Combustion Energy (FCSPTC-2017) Andhra Pradesh, India AIP Conference Proceedings Scopus
15. T. Deshamukhya, D. Bhanja, S. Nath, A. Maji, Gautam Choubey: "Analytical Study of Temperature Distribution in a Rectangular Porous Fin Considering both Insulated and Convective Tip" International Conference on Functional Materials, Characterization, Solid State Physics, Power, Thermal and Combustion Energy (FCSPTC-2017) Andhra Pradesh, India AIP Conference Proceedings Scopus
16. Jialai Wang, Sudipta Halder, Fang, Guangping Lin: "Novel Encapsulation Technology for Energy Efficient Building Materials and Self-Healing of Concrete" (2017) Chicago, USA
17. Subhankar Das, Sudipta Halder, and Nazrul Islam Khan: "Influence of acoustic cavitation mixing on tensile and fracture properties of oxidized fullerene-epoxy nanocomposites" International Conference on Nanotechnology: Ideas, Innovations & Initiatives-2017 (ICN: 3i-2017) (2017) Indian Institute of Technology, Roorkee
18. K. Maharshi, L. Roy, T. Mukhopadhyay, S. Dey: "Stochastic dynamic behaviour of polymer hydrodynamic journal bearing" 6th International Conference on Functional Electroceramic and Polymers (ICEP 2017) (2017) Indian Institute of Technology Kharagpur, India
19. P. K. Karsh, A. Kumar, S. Dey: "Polynomial neural network based stochastic natural frequency analysis of functionally graded plates" 13th International Conference on Vibration Problems (ICOVP 2017) (2017) Indian Institute of Technology Guwahati, India
20. P. K. Karsh, T. Mukhopadhyay, S. Dey: "Stochastic investigation of natural frequency for functionally graded plate" 3rd International Conference on Mechanical and Aeronautical Engineering (ICMAE 2017) (2017) Dubai, UAE
21. R. R. Kumar, Vaishali, K.M. Pandey, S. Dey: "Effect of skewness on stochastic natural frequency of sandwich plates" 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2017) (2017) Indian Institute of Technology Kharagpur, India
22. S. Das, B. Roy, S. Dey: "Effect of eccentricity on stochastic dynamic characteristics of hydrodynamic journal bearing" 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2017) (2017) Indian Institute of Technology Kharagpur, India
23. P. K. Karsh, S. Dey: "Stochastic frequency response function analysis of functionally graded plates" 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2017) (2017) Indian Institute of Technology Kharagpur, India
24. Singh, Yogesh, and Santhakumar Mohan: "Development of a Planar 3PRP Parallel Manipulator using Shape Memory Alloy Spring based Actuators" International Conference on Advances in Robotics

2016

1. Rajeev Nayan Gupta and A.P.Harsha: "Antiwear and extreme pressure properties of CaCu3Ti4O12 nanoparticles as biolubricant additive" National conference on Tribology­ Energy, Environment and Efficiency 2016 (2016) CSIR-AMPRI Bhopal Others
2. Rajeev Nayan Gupta and A.P.Harsha: "Tribological study on CeO2 nanoparticles as a biolubricant additive" National Tribology Conference 2016 (2016) IIT (BHU) Varanasi Others
3. Chiranjib Bhowmik, Sachin Gangwar, Sumit Bhowmik and Amitava Ray: "Selection of Energy-Efficient Material: An Entropy–TOPSIS Approach" International Conference on Soft Computing: Theories and Applications (SoCTA 2016) (2016) Amity University Rajasthan, Jaipur, India Soft Computing: Theories and Applications Proceedings of SoCTA 2016 31-39 https://doi.org/10.1007/978-981-10-5699-4_4
4. Chiranjib Bhowmik, Sachin Gangwar, Sumit Bhowmik and Amitava Ray: "Optimum Selection of Energy-Efficient Material: A MCDM-Based Distance Approach" International Conference on Soft Computing: Theories and Applications (SoCTA 2016) (2016) Amity University Rajasthan, Jaipur, India Soft Computing: Theories and Applications Proceedings of SoCTA 2016 59-79 https://doi.org/10.1007/978-981-10-8049-4_3
5. M. Ahuja, N. V. Deshpande, S. Pati: "Strength and vibration analysis of transmission housing of a tractor" Sixth international congress on Computational mechanics and simulation (ICCMS2016) (2016) IIT Bombay
6. S. Dutta, A. K. Biswas, S. Pati: "Analysis of Entropy Generation due to Natural Convection in Rhombic Enclosure" 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (2016) MNNIT Allahabad
7. S. R. Sahoo, S. Pati: "Numerical Analysis of Thermo-hydraulic Transport Characteristics inside Raccoon Microchannels" 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (2016) MNNIT Allahabad
8. Gautam Choubey, L Suneetha, K.M Pandey: "Composite materials used in Scramjet-A Review" International Conference on Processing of Materials, Minerals and Energy (PMME-2016 Andhra Pradesh, India Materials Today: Proceedings Scopus
9. Gautam Choubey, K.M Pandey, D Sharma, A. Debbarma: "Computational simulation of multi-strut central lobed injection of hydrogen in a scramjet combustor" International Conference on Recent Trends in Engineering and Material Sciences (ICEMS-2016) Jaipur, India Perspectives in Science Scopus
10. Gautam Choubey, K.M Pandey, A. Maji, T. Deshamukhya, A. Debbarma: "Computational Investigation of Multi-Strut Injection of Hydrogen in a Scramjet Combustor," ICMPC-2016 Andhra Pradesh, India Materials Today: Proceedings Scopus
11. A. Debbarma, KM Pandey, D Sharma, Gautam Choubey: "CFD analysis of rewetting vertical nuclear fuel rod by dispersed fluid jet impingement," International Conference on Recent Trends in Engineering and Material Sciences ICEMS-2016) Jaipur, India Perspectives in Science Scopus
12. D. Sharma, K.M. Pandey, A. Debbarma and Gautam Choubey: "Numerical Investigation of Heat transfer enhancement of SiO2-water based nanofluids in Light water nuclear reactor," International Conference on Recent Trends in Engineering and Material Sciences ICEMS-2016) Jaipur, India Materials Today: Proceedings Scopus
13. Nazrul Islam Khana, Sudipta Halder, M.S. Goyat: "Effect of emulsifier on the properties of capsules for fabricating healing enabled next generation adhesive joints" 30th International Conference on Surface Modification Technologies (SMT30) (2016) Milan, Italy
14. Subhankar Das, Sudipta Halder: "Effect of oxidation and silanization of C60 on the tensile and dynamic mechanical behavior of epoxy nanocomposites" The 4th International Conference on Advances in Materials and Materials Processing (ICAMMP-IV) (2016) Indian Institute of Technology, Kharagpur
15. Subhankar Das, Sudipta Halder: "Effect of oxidation and silanization of C60 on the tensile and dynamic mechanical behavior of epoxy nanocomposites" 4th International Conference on Advances in Materials & Materials Processing (icAMMP-IV) (2016) Indian Institute of Technology, Kharagpur
16. Bipul Das, Sukhomay Pal, Swarup Bag: "Machine vision system based monitoring approach for friction stir welding process" IEEE First International Conference on Control, Measurement and Instrumentation (CMI) (2016) Jadavpur University, India IEEE Xplore 83-86 10.1109/CMI.2016.7413715 Scopus
17. Bipul Das, Sukhomay Pal, Swarup Bag: "Wavelet transform based defect identification in friction stir welding process" 6TH International and 27TH All India Manufacturing Technology, Design and Research Conference (AIMTDR)) (2016) COEP, Pune
18. S. Dey, T. Mukhopadhyay, S. Chakraborty, R. Chowdhury, S. Adhikari, A. Karmakar, A. Spickenheuer: "Stochastic natural frequency of composite plates using Kriging model" 6th International Congress on Computational Mechanics and Simulation (ICCMS 2016) (2016) Indian Institute of Technology Bombay, India
19. B. C. Hazarika, H. Singh, S. Dey: "Free vibration of functionally graded plates – A comparative study" 4th International Conference on Advances in Materials and Materials Processing (ICAMMP-IV 2016) (2016) Indian Institute of Technology Kharagpur, India
20. S. Dey, T. Mukhopadhyay, S. Adhikari: "A meta-law for functionally graded materials based on low velocity impact parameters" 4th International Conference on Advances in Materials and Materials Processing (ICAMMP-IV 2016) (2016) Indian Institute of Technology Kharagpur, India
21. H. Singh, B. C. Hazarika, S. Dey: "Low velocity impact responses of functionally graded plates" 11th International Symposium on plasticity and impact mechanics (IMPLAST 2016) (2016) Indian Institute of Technology Delhi, India

2015

1. Rahul Kumar, Kaushik Kumar, and Sumit Bhowmik: "Analysis of Mechanical Properties of Wood Dust Reinforced Epoxy Composite Using Response Surface Methodology" 6th International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2015) (2015) Melaka, Malaysia Advanced Materials Research 258-262 https://doi.org/10.4028/www.scientific.net/AMR.1119.258
2. Choudhury, I., Mathur, A., Phukan, A., Nath, W., and Halder, S: "Preparation and Characterization of self-healing polymer matrix" International Symposium on Polymer Science and Technology, MACRO 2015 (2015) Indian Association for the Cultivation of Science, Kolkata, India
3. Ikbal Choudhury, Sudipta Halder: "Synthesis of self-healing thermosetting resin based capsules and their related complexities" MIMT 2015: 6th International Conference on Mechanical, Industrial, and Manufacturing Technologies (2015) Melaka, Malaysia
4. Bipul Das, Sukhomay Pal, Swarup Bag: "Neurofractal modelling of weld quality in friction stir welding" 2nd International Conference on Advances in Cutting, Welding and Surfacing (CWS) (2015) CIT, Coimbatore
5. S. Dey, T. Mukhopadhyay, S. Adhikari: "Free vibration analysis of angle-ply composite plates with uncertain properties" 56th AIAA/ASME/ASCE/AHS/ASC structures, Structural Dynamics, and Materials Conference (2001) Florida, USA
6. S. Dey, T. Mukhopadhyay, H. Haddad Khodaparast, S. Adhikari: "Reliability based optimization of composite spherical shells" 23rd UK Conference of the Association for Computational Mechanics in Engineering (ACME 2015) (2015) Swansea University, Swansea, United Kingdom
7. S. Dey, T. Mukhopadhyay, H. Haddad Khodaparast, S. Adhikari: "Uncertainty quantification of dynamic characteristics of composites – A fuzzy approach" 1st International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2015) (2015) Crete Island, Greece
8. S. Dey, T. Mukhopadhyay, A. Spickenheuer, U. Gohs, S. Adhikari: "Artificial neural network based stochastic natural frequency analysis of composite plates" 12th International Conference on Vibration Problems (ICOVP 2015) (2015) Indian Institute of Technology Guwahati, India
9. Santhakumar, Mohan, Jin Whan Kim, and Yogesh Singh: "A robust task space position tracking control of an underwater vehicle manipulator system" International Conference of Robotics Society of India Association for Computing Machinery Digital Library
10. Singh, Yogesh, and Mohan Santhakumar: "Comparative kinematic and dynamic performance analysis of planar parallel manipulators" conference on advances in robotics

2014

1. Chinmaya Kumar Sahoo, Jageshwar Kumar Sahu, and Manoj Masanta: "“Effect of Pulsed Nd: YAG Laser Parameters in Preplaced TiC Coating on Aluminium Substrate.”" IIT Guwahati, Assam, India
2. Rajeev Nayan Gupta and A.P.Harsha: "Experimental study on role of Zinc Dialkyldithiophosphate in castor oil" National Tribology Conference 2014 (2014) PES University, Bengaluru Others
3. Rahul Kumar, Kausik Kumar, Prasanta Sahoo, and Sumit Bhowmik: "Study of Mechanical Properties of Wood Dust Reinforced Epoxy Composite" 3rd International Conference on Materials Processing and Characterisation (ICMPC 2014) (2014) GRIET Hyderabad, India Procedia Materials Science 551-556 https://doi.org/10.1016/j.mspro.2014.07.070 Scopus
4. Rahul Kumar, Kaushik Kumar, and Sumit Bhowmik: "Optimization of Mechanical Properties of Epoxy based Wood Dust Reinforced Green Composite Using Taguchi Method" International Conference on Advances in Manufacturing and Materials Engineering (AMME 2014) (2014) NIT Surathkal Procedia Materials Science 688-696 https://doi.org/10.1016/j.mspro.2014.07.316 Scopus
5. Barnasree Chanda, Rahul Kumar, Kaushik Kumar and Sumit Bhowmik: "Optimisation of Mechanical Properties of Wood Dust-reinforced Epoxy Composite Using Grey Relational Analysis" 4th International Conference on Soft Computing for Problem Solving Advances in Intelligent Systems and Computing (2014) NIT Silchar Proceedings of Fourth International Conference on Soft Computing for Problem Solving. Advances in Intelligent Systems and Computing, Springer, New Delhi 13-24 https://doi.org/10.1007/978-81-322-2220-0_2 (2),
6. Gautam Choubey, K.M Pandey: "Numerical Investigation of Hypersonic Combustion for a Hydrogen-fueled Scramjet Engine at Flight Mach Number of 7" Proceedings of the 5thInternational and 41st National Conference on Fluid Mechanics and Fluid Power [FMFP-2014] IIT Kanpur UP India Scopus
7. Choudhury, I., Mathur, A. and Halder, S: "Determination of elastic behavior of self-healing composites using mathematical models" Proceedings of the International Conference on Research and Scientific Innovation (RSIS) (2013) Ahmedabad Management Association, ATIRA Campus, IIM-A Road, Ahmedabad, Gujarat, India SCI (I),
8. Tankeshwar Prasad, Sudipta Halder: "Optimization of Parameters and its Effect on Size of ZnO Nanoparticles Synthesized by Sol-gel Method" SocproS-2014 (2014) National Institute of Technology, Silchar Springer 403-411 10.1007/978-81-322-2220-0_32
9. Bipul Das, Sukhomay Pal, Swarup Bag: "Monitoring of friction stir welding process through signals acquired during the welding" 5TH International and 26TH All India Manufacturing Technology, Design and Research Conference (AIMTDR)) (2014) IIT Guwahati
10. S. Dey, A. Karmakar, S. Adhikari: "Effect of rotation on free vibration analyses of functionally graded conical shells – A finite element approach" 1st International Conference on Mechanics of Composites (MECHCOMP 2014) (2014) Stony Brook University, Long Island, NY State, USA
11. S. Dey, M. Roy, S. Das, A. Karmakar: "Effect of twist and striker velocity on transient response of torsion stiff composite conical shells under delamination" 10th International Conference on Mechanical Engineering (ICME 2014) (2014) BUET, Dhaka, Bangladesh
12. S. Dey, T. Mukhopadhyay, S. Adhikari: "Transient response of delaminated torsion stiff composite conical shell panel subjected to low velocity oblique impact" The Twelfth International Conference on Computational Structures Technology (CST 2014) (2014) Naples, Italy
13. S. Dey, S. Adhikari, A. Karmakar: "Free vibration of composite plates – A Monte Carlo approach" International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2014) (2014) Indian Institute of Technology Kharagpur, India

2013

1. S. Bhowmik, K. Bhattacharyya, P. Sahoo, S. K. Acharyya, J. Chattopadhyay, and S. Dhar: "Evaluation of master curve and T0 of 20MnMoNi55 steel from CT and TPB specimens and a comparative study" 22nd Conference on Structural Mechanics in Reactor Technology (SMiRT – 22) (2013) San Francisco, California, USA
2. Sumit Bhowmik, Prasanta Sahoo, Sanjib Kumar Acharyya, Sankar Dhar: "Fracture Behaviour of 20MnMoNi55 Steel in DBT Region under Corrosive Environment" International Conference on Design and Manufacturing (IConDM 2013) (2013) IIITDM Kancheepuram, Chennai, India Procedia Engineering 795-804 https://doi.org/10.1016/j.proeng.2013.09.155 Scopus
3. S. Pati, P. Kaushik, S. Chakraborty, S. K. Som: "Effects of interfacial slip on film condensation over horizontal tubes with progressively increasing radius of curvature in the direction of gravity" 22nd National and 11th ISHMT - ASME Heat and Mass Transfer Conference (2013) IIT Kharagpur
4. Sudipta Halder, P K Ghosh and M S Goyat: "Lap shear behavior of ZrO2 nanoparticle reinforced epoxy adhesive cured at different temperatures" International Conference on Recent Advances in Composite Materials (ICRACM-2013) (2013) International Centre,Goa, India
5. Sudipta Halder, R K Gupta, Tankeshwar Prasad: "Effect of process zone on tensile behavior of DGBA/SiO2 nanocomposites" 5th National Symposium for Materials Research Scholars, MR-13, 2013 (2013) Indian Institute of Technology, Bombay
6. Subhankar Das, Pannalal Chowdhury, Sudipta Halder: "Stress and Free Edge Delamination Analyses of Delaminated Composite Structure using ANSYS" International Conference On DESIGN AND MANUFACTURING, IConDM, 2013 (2013) Indian Institute of Information Technology Design and Manufacturing, Chennai, Tamil Nadu Elsevier Procedia 10.1016/j.proeng.2013.09.218 SCI
7. Sudipta Halder, P.K. Ghosh: "Mechanism of nanoparticle dispersion via acoustic cavitation in highly viscous fluid" 1st International and 16th National Conference on Machines and Mechanisms (iNaCoMM 2013) (2013) Indian Institute of Technology, Roorkee
8. Abhishek Paul; Rajsekhar Panua; Probir Kumar Bose; Rahul Banerjee: "An experimental study of performance and emission parameters of a compression ignition engine fueled by different blends of Diesel-Ethanol-biodiesel" International Conference on Energy Efficient Technologies for Sustainability (ICEETS) (2013) Xaviers College of Engineering, Nagercoil IEEE doi: 10.1109/ICEETS.2013.6533485. Scopus
9. S. Dey, A. Das, A. Karmakar: "Effect of contact stiffness and twist on low-velocity impact oblique impact response of composite turbomachinery blades" International Conference on Smart Technologies for Mechanical Engineering (STME-2013) (2013) Delhi Technological University (DTU), New Delhi, India
10. S. Dey, A. Karmakar: "Effect of multiple delamination on composite turbine blade subjected to low velocity impact" 1st International & 16th National Conference on Machines and Mechanisms (iNaCoMM 2013) (2013) Indian Institute of Technology Roorkee, India

2012

1. Sumit Bhowmik, Prasanta Sahoo, Sanjib Kumar Acharyya, and Sankar Dhar: "Comparative study of fracture toughness in ductile brittle transition region of 20MnMoNi55 steel" National conference on Sustainable Development through Innovative Research in Science and Technology Jadavpur University, Kolkata
2. Sumit Bhowmik, Prasanta Sahoo, Sanjib Kumar Acharyya, and Sankar Dhar: "Effect of thickness, geometry and microstructure on fracture toughness for 20MnMoNi55 steel" Symposium on Fatigue, Fracture and Integrity Assessment-2012 (2012) TMDC Auditorium, XLRI Campus, Jamshedpur R&D Division, Tata Steel Ltd., Jamshedpur & National Metallurgical Laboratory Jamshedpur
3. Sudipta Halder, M.S. Goyat, and P.K. Ghosh: "Study on mechanical and fracture characteristics of silica-nanoparticle reinforced epoxy adhesive" National Conference on “Global challenges- Role of Science and Technology in Giving Their Solutions TIT&S bhiwani 2012 Technological Institute of Textile & Sciences, Birla Colony, Bhiwani, Haryana India
4. Sudipta Halder, A K Pandya, A Mitra, A Basu Mallic: "Crystallization behavior and Curie temperature Properties of Al doped Nd-Fe-B based Nanocomposite Permanent Magnet" International Conference on Advances in Materials and Processing-2012 (2012) Indian Institute of Technology, Roorkee
5. Sudipta Halder, A K Pandya, A Mitra: "Crystallization behavior and Curie temperature of Co doped Nd-Fe-B based Nanocomposite Permanent Magnet" International Symposium on Converting Challenges into Opportunities: Iron and Steel-2012 Jamshedpur,India
6. S. Dey, M. Roy, A. Karmakar: "Finite element transient dynamic analysis of delaminated composite conical shells subject to low-velocity impact" ASME 2012 Gas Turbine India Conference Mumbai
7. S. Dey, A. Karmakar: "Low-velocity impact response of cross-ply composite conical shells under delamination" Third Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012) (2012) Indian Institute of Technology Delhi, India

2011

1. S. Bhowmik, P. Sahoo, S. K. Acharyya, S. Dhar, and J. Chattopadhyay: "Direct measurement of JIC from the load versus load-line displacement data for 20MnMoNi55 steel" International Conference on Mechanical Engineering 2011 (ICME2011 (2011) Dhaka, Bangladesh 1 - 5
2. S. Bhowmik, A. Chatterjee, S. K. Acharyya, P. Sahoo, S. Dhar, and J. Chattopadhyay: "Application of master curve methodology in the ductile to brittle transition region for the material 20MnMoNi55 steel" 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21) (2011) New Delhi, India International Association for Structural Mechanics in Reactor Technology
3. Sudipta Halder, M.S. Goyat, and P.K. Ghosh: "Micro-structural study of tensile mirror zone and its effect on mechanical properties of SiO2/epoxy nanocomposite" National conference on Microstructure-2011 Indian Institute of Technology, Roorkee
4. S. Sakthivel, Sudipta Halder, P. D. Gupta and N.K.Agnihotra: "Bio-fuel from Used Vegetable (cooking) Oil in Middle East" Qatar Foundation Annual Research Forum, 2011 Qatar National Convention Center (QNCC), Doha, Qatar
5. S. Dey, A. Karmakar: "Natural frequencies of bending and torsion stiff composite conical shells with delamination" 15th National Conference on Machines and Mechanisms (NaCoMM 2011) (2011) Indian Institute of Technology Madras, India
6. S. Dey, A. Karmakar: "Characterization of natural frequencies of pretwisted single and double delaminated cross-ply composite conical shells" National Conference on Recent Advances in Materials & Technology (NCRAMT – 2011) (2011) Haldia Institute of Technology, Haldia, West Bengal, India
7. S. Dey, A. Karmakar: "Effect of twist and rotation on free vibration of delaminated pretwisted angle-ply composite conical shells" 4th National Conference on Emerging Trends in Mechanical Engineering (ETME 2011) (2011) G. H. Patel College of Engineering & Technology, V.V. Nagar, Gujarat, India
8. S. Dey, A. Karmakar: "Effect of location of delamination on free vibration of pretwisted graphite-epoxy cross-ply composite conical shells" Proceeding of International Conference on Advances in Polymer Science and Rubber Technology (APSRT) – Challenges towards 2020 and Beyond (2011) Indian Institute of Technology Kharagpur, India
9. S. Dey, A. Karmakar: "Effect of twist and rotation on free vibration of delaminated pretwisted angle-ply composite conical shells" 4th National Conference on Emerging Trends in Mechanical Engineering (ETME 2011) (2011) G. H. Patel College of Engineering & Technology, V.V. Nagar, Gujarat, India
10. S. Dey, A. Karmakar: "Comparative study of single and double delamination of composite shells" International Conference on Advances in Engineering and Technology (ICAET 2011) (2011) E.G.S. Pillay Engineering College, Nagapattinum, Tamilnadu, India
11. S. Dey, A. Karmakar: "Effect of multiple delamination on free vibration of cross-ply composite conical shells" 5th International Conference on Advances in Mechanical Engineering (ICAME 2011) (2011) Sardar Vallabhbhai National Institute of Technology Surat, Gujarat, India
12. S. Dey, A. Karmakar: "Characterization of natural frequencies of pretwisted single and double delaminated cross-ply composite conical shells" National Conference on Recent Advances in Materials & Technology (NCRAMT – 2011) (2011) Haldia Institute of Technology, Haldia, West Bengal, India
13. S. Dey, A. Karmakar: "Free vibration of delaminated torsion stiff composite conical shells" International Conference on Advances in Materials and Manufacturing Technology (AMMT 2011) Chitkara Institute of Engineering & Technology, Chandigarh, India
14. S. Dey, A. Karmakar: "Natural frequencies of bending and torsion stiff composite conical shells with delamination" 15th National Conference on Machines and Mechanisms (NaCoMM 2011) (2011) Indian Institute of Technology Madras, India
15. S. Dey, A. Karmakar: "Natural frequencies of delaminated quasi-isotropic composite conical shells" International Conference on Advances in Materials and Materials Processing (ICAMMP 2011) (2011) Indian Institute of Technology Kharagpur, India
16. S. Dey, A. Saha, A. Karmakar: "Free vibration analysis of bending stiff composite conical shells with delamination – A finite element approach" 9th International Conference of Mechanical Engineering (ICME 2011) (2011) Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh

2010

1. S. Dey, A. Karmakar: "Vibration characteristics of delaminated pretwisted cross-ply composite conical shells" Proceeding of International Conference on Carbon Nanotechnology : Potential and Challenges (CARBON 10) Indian Institute of Technology Kanpur, India (ISBN–13:978-981-08- 7716-3 & ISBN–10:981–08-7716-1),
2. S. Dey, A. Karmakar: "Torsional effect on free vibration of delaminated pretwisted crossply composite conical shells" Conference on Trends in Mechanical Engineering (TIME’10) KITS, Warangal, India
3. S. Dey, A.Karmakar: "Torsional effect on free vibration of delaminated pretwisted cross-ply composite conical shells" Conference on Trends in Mechanical Engineering (TIME’10) KITS, Warangal, India
4. S. Dey, T. Bandopadhyay and A. Karmakar: "Vibration characteristics of delaminated composite conical shells" Proceeding of 5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM) (2010) Indian Institute of Technology Kharagpur, India (ISBN:978-93-80813-03-5),

2007

1. T. K. Jana, S. Pati, A. Chatterjee: "Characteristics Study and Implementation Framework of Holonic Manufacturing Systems" Proceedings of the International Conference on Emerging Mechanical Technology-Macro to Nano(EMTM2N-2007) (2007) BITS, Pilani, India

1994

1. K. Chakraborty, S. Das, A. B. Chattopadhyay, A.K. Chakraborty: "On machinability and grindability of vanadium microalloyed steel" 16th AIMTDR Conference Bangalore, India