|
List Of Book Chapters
2025
- Dinda, A., Acharya, J., Kumar, V., Nath, S.: "A Comparative Analysis of the Performance of Different Multi-layer Fire-Retardant Fabric Orientations Under High Radiant Exposure: A Numerical Approach" A Comparative Analysis of the Performance of Different Multi-layer Fire-Retardant Fabric Orientations Under High Radiant Exposure: A Numerical Approach 2025 https://doi.org/10.1007/978-981-97-4167-0_16
- Sharma, S., Nath, S., Bhanja, D.: "Linear Instability Analysis of Viscous Liquid Sheet Travelling in a Confined Space with Two Co-flowing Gas Streams of Equal Velocity Considering Initial Varicose Mode of Disturbance." Linear Instability Analysis of Viscous Liquid Sheet Travelling in a Confined Space with Two Co-flowing Gas Streams of Equal Velocity Considering Initial Varicose Mode of Disturbance. 2025 https://doi.org/10.1007/978-981-97-4167-0_2
2024
- Praveen Kumar, Vishak AP, Bipul Das, Pohor Patric Debbarma: "Design and development of load member for measuring force and torque in friction stir welding process" De, A., Mukherjee, P.P., Pati, S., Biswas, A.Recent Trends in Mechanical Engineering December 2024 https://doi.org/10.1007/978-981-97-7535-4_40 Scopus
- Pohor Patric Debbarma, M.M. Mahapatra, Bipul Das: "Estimation of Ultimate Tensile Strength and Percentage of Elongation in Friction Stir Weld Joints of Cryo-Rolled Al–Mg-Si Alloys" Sudarshan, T.S., Sharma, A.K., Misra, R., Patowari, P.KRecent Advancements in Mechanical Engineering June 2024 https://doi.org/10.1007/978-981-97-0900-7_2 Scopus
- Mehdi Mehtab Mirad, S. A. Rajendra, Jasper Ramon, Bipul Das: "Harmonic Analysis of Ultrasonic Machining Tool Through Finite Element Method" Sudarshan, T.S., Sharma, A.K., Misra, R., Patowari, P.K.Recent Advancements in Mechanical Engineering June 2024 https://doi.org/10.1007/978-981-97-0900-7_8 Scopus
- Sandeep Kumar Pandey, Sudhir Kumar, and Rajeev Nayan Gupta: "Tribological Study of Titanium Carbide Reinforced HDPE Polymer Composite Under Dry Sliding Condition" Amitava De, Partha P. Mukherjee, Sukumar Pati, Agnimitra BiswasLecture Notes in Mechanical Engineering December 2024 https://doi.org/10.1007/978-981-97-7535-4_42 Scopus
- Rupam Hazarika, Darshana Handique, Sandeep Kumar Pandey, Sudhir Kumar, and Rajeev Nayan Gupta: "Tribological Study of Cenosphere and Bentonite Clay Reinforced Hybrid Epoxy Composite" Amitava De, Partha P. Mukherjee, Sukumar Pati, Agnimitra BiswasLecture Notes in Mechanical Engineering December 2024 https://doi.org/10.1007/978-981-97-7535-4_41 Scopus
- Noor Ameen Ahmed, Abu Bakar Siddique Choudhury, Sudhir Kumar, Sandeep Kumar Pandey, and Rajeev Nayan Gupta: "Tribological Study of AA7075—Graphene—Kaolin Hybrid Composite Fabricated Through Powder Metallurgy Route" Amitava De, Partha P. Mukherjee, Sukumar Pati, Agnimitra BiswasLecture Notes in Mechanical Engineering December 2024 https://doi.org/10.1007/978-981-97-7535-4_39 Scopus
- Sudhir Kumar and Rajeev Nayan Gupta: "A Review on Fabrication and Properties of Magnesium Metal Matrix Composite Materials" Sudarshan, T.S., Sharma, A.K., Misra, R., Patowari, P.K.Lecture Notes in Mechanical Engineering February 2024 https://doi.org/10.1007/978-981-97-0900-7_15 Scopus
- Pohor Patric Debbarma, Praveen Kumar, Bipul Das: "Numerical Modelling of Laser Material Deposition Method of AA1100 Billet for In-Situ Repair of an Exit Hole in Friction Stir Welding" De, A., Mukherjee, P.P., Pati, S., Biswas, A.Recent Trends in Mechanical Engineering December 2024 https://doi.org/10.1007/978-981-97-7535-4_36 Scopus
- Ashimjyoti Chutia, Sonali Nag, Bipul Das: "Phase transformation modelling during the material deposition using friction stir additive manufacturing" De, A., Mukherjee, P.P., Pati, S., Biswas, A.Recent Trends in Mechanical Engineering December 2024 https://doi.org/10.1007/978-981-97-7535-4_35 Scopus
- Alvina Das, Debangshu Das, Bipul Das: "Melting behaviour of the wire in induction heating based wire additive manufacturing" De, A., Mukherjee, P.P., Pati, S., Biswas, A.Recent Trends in Mechanical Engineering December 2024 https://doi.org/10.1007/978-981-97-7535-4_60 Scopus
- Divyansh Singh & Abhishek Paul: "Enviroeconomic Analysis of Diesel Engine, Fuelled by Waste Cooking Oil and Waste Polyethylene Co-pyrolysis Oil-Diesel Blends" Amitava De, Partha P. Mukherjee, Sukumar Pati, Agnimitra BiswasRecent Trends in Mechanical Engineering December 2024 https://doi.org/10.1007/978-981-97-7535-4_70 Scopus
- Voddepalli, S., Nath, S., Biswas, A.: "Determining the Best Passive Heat Transfer Enhancement Technique in Circular Pipe Heat Exchangers with the MCDM Technique." Determining the Best Passive Heat Transfer Enhancement Technique in Circular Pipe Heat Exchangers with the MCDM Technique. 2024 https://doi.org/10.1007/978-981-99-7827-4_24
- Vaibhav Srivastava, Kalyan Chakraborty: "The fuzzy logic model for machining data selection" Algorithms for intelligent systems 2024 10.1007/978-981-97-3526-6_2 Scopus
- Sumit Mahajan, Kalyan Chakraborty: "The application of the preference selection index method to find the best work- tool combination during machining" Advances in materials and agile manufacturing, Lecture Notes in Mechanical Engineering (LNME) 2024 10.1007/978-981-99-6601-1_4 Scopus
- Subrata Bhowmik, Abhishek Paul & Rajsekhar Panua: "Hybrid ANN-MOGA-II-AHP Based Performance-Emission Optimization of Diesel-Ethanol Fueled CRDI Engine" T. S. Sudarshan, Apurbba Kumar Sharma, R.D. Misra, P. K. PatowariRecent Advancements in Mechanical Engineering June 2024 https://doi.org/10.1007/978-981-97-0900-7_21 Scopus
- Voddepalli, S., Nath, S., Biswas, A.: "Numerical Investigation on Heat Transfer and Fluid Flow in a Circular Tube with Rectangular Cut Perforated Twisted Tape" Numerical Investigation on Heat Transfer and Fluid Flow in a Circular Tube with Rectangular Cut Perforated Twisted Tape 2024 https://doi.org/10.1007/978-981-97-7535-4_74
- Rai, S., Tamuli, B.R., Nath, S.: "Numerical Analysis of Flow Over Slitted Cylinder Under High Blockage." Numerical Analysis of Flow Over Slitted Cylinder Under High Blockage. 2024 https://doi.org/10.1007/978-981-97-0900-7_36
2023
- Vikram Pandey and Kalyan Chakraborty: "The application of ANOVA and Taguchi-Fis simulation for performance evaluation of machining parameters and subsequent parametric optimization during dry turning of A356 (Al-Si) alloy" , Recent Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering 2023 10.1007/978-981-19-2188-9_1 Scopus
- K. Anoop and Kalyan Chakraborty: "The Application of TOPSIS Method for Optimization of Machining Parameters During Hard Turning of H13 Tool Steel" Recent Trends in Product Design and Intelligent Manufacturing Systems, Lecture Notes in Mechanical Engineering 2023 10.1007/978-981-19-4606-6_72 Scopus
- Sunil Kumar and Kalyan Chakraborty: "The Chip Formation Mechanism for the Machining of the EN8 Unalloyed Steel" Recent Advances in Materials and Manufacturing Technology, Lecture Notes in Mechanical Engineering (LNME) 2023 10.1007/978-981-99-2921-4_1 Scopus
- Jai Tiwary and Kalyan Chakraborty: "The machining behavior of 52100 bearing steel" Lecture Notes in Mechanical Engineering (LNME), Springer Nature Singapore Pte Ltd. 2023 10.1007/978-981-99-1288-9_1 Scopus
- Divya Zindani, Saikat Ranjan Maity, Sumit Bhowmik: "an Investigation into the Effect Of Criteria Interaction on the Tomada De Decisao Interativa Multicriterio (TODIM) Method" Pushpdant Jain, Kumar Abhishek, Prasenjit ChatterjeeDecision-Making Models and Applications in Manufacturing Environments 2023 https://doi.org/10.1201/9781003394723
- Tripathi, E., Sarmah, P., Patowari, P.K., Pati, S.: "An Economical and Efficient Method for the Fabrication of Spiral Micromixer" Koushik Guha, Gorachand Dutta, Arindam Biswas, K. Srinivasa RaoMEMS and Microfluidics in Healthcare March 2023 10.1007/978-981-19-8714-4_10
2022
- Kritesh Kumar Gupta, Lintu Roy & Sudip Dey: "Ballistic Performance of Bi-layer Graphene: Artificial Neural Network Based Molecular Dynamics Simulations" Machine Learning Applied to Composite Materials 2022
- Mehdi Mehtab Mirad, Jiomani Talukdar, Bipul Das: "Analysis of Tool Defect in Ultrasonic Machining Process Through Numerical Modelling" Sudarshan, T.S., Pandey, K.M., Misra, R.D., Patowari, P.K., Bhaumik, SRecent Advancements in Mechanical Engineering September 2022 https://doi.org/10.1007/978-981-19-3266-3_35 Scopus
- Mehdi Mehtab Mirad, Bipul Das: "Numerical analysis of tool material in the ultrasonic machining process" Kumar, S., Ramkumar, J., Kyratsis, P.Recent Advances in Manufacturing Modelling and Optimization April 2022 https://doi.org/10.1007/978-981-16-9952-8_8 Scopus
- Bipul Das, Jasper Ramon: "Machine learning and real-time signal features integration for strength modelling in friction stir welding process" Kumar, S., Ramkumar, J., Kyratsis, P.Recent Advances in Manufacturing Modelling and Optimization April 2022 https://doi.org/10.1007/978-981-16-9952-8_19 Scopus
- Mehdi Mehtab Mirad, Saka Abhijeet Rajendra, Jasper Ramon, Bipul Das: ", Modal and fatigue analysis of ultrasonic machining tool for performance analysis" Das, B., Patgiri, R., Bandyopadhyay, S., Balas, V.E.Systems and Technologies June 2022 https://doi.org/10.1007/978-981-19-0836-1_26 Scopus
- Dhiraj Raj, Saikat Ranjan Maity, Bipu Das: "Numerical simulation for temperature distribution for low power laser clad coating of Nickel" Sudarshan, T.S., Pandey, K.M., Misra, R.D., Patowari, P.K., Bhaumik, SRecent Advancements in Mechanical Engineering September 2022 https://doi.org/10.1007/978-981-19-3266-3_43 Scopus
- S Das, P Das, S Halder, P Choudhury: "Role of Nanoreinforcement onto Intra-and Interlaminar Fracture of Hybrid Laminated Composites" Sri Bandyopadhyay, Raghavendra GujjalaToughened Composites, Micro and Macro Systems 2022 http://dx.doi.org/10.1201/9780429330575-16
- Tripathi, E., Patowari, P.K., Pati, S.: "Numerical Investigations of Mixing Performance in Split and Recombine Micromixer" Shailendra Kumar, J. Ramkumar, Panagiotis KyratsisRecent Advances in Manufacturing Modelling and Optimization April 2022 10.1007/978-981-16-9952-8_12
- Rajeev Nayan Gupta, A.P.Harsha and Tej Pratap: "Effect of surface treated calcium-copper-titanate as a lubricant additive in cottonseed oil on tribo-performance in sliding contacts" M.K.Singh and R.K.GautamLecture Notes in Mechanical Engineering April 2022 https://doi.org/10.1007/978-981-16-4083-4_44 Scopus
- Sumit Mahajan, Kalyan Chakraborty: "The Effect of HSS and Carbide Tools on the Mechanism of Chip Formation During Turning of Medium Carbon Steel (AISI1030)" Recent Advances in Manufacturing, Automation, Design and Energy Technologies 2022 10.1007/978-981-16-4222-7_19 Scopus
2021
- Mehta S.K., Pati S.: "Analysis of Heat Transfer and Pressure Drop for Pressure Driven Flow of Non-Newtonian Fluids Through a Serpentine Channel: Influence of Prandtl Number" Prashant M. Pawar, R. Balasubramaniam, Babruvahan P. Ronge, Santosh B. Salunkhe, Anup S. Vibhute, Bhuwaneshwari MelinamathTechno-Societal 2020 June 2021 10.1007/978-3-030-69925-3_92
- Subrata Kushari, Arunasis Chakraborty, Tanmoy Mukhyopadhyay, Ravi Ranjan Kumar, Saiket Ranjan Maity & Sudip Dey: "Surrogate model validation and verification for random failure analyses of composites" Recent Advances in Layered Materials and Structures 2021
- Dhiraj Raj, Bipul Das, Saikat Ranjan Maity: "Preheating Path Selection Through Numerical Analysis of Laser-Aided Direct Metal Deposition" Pandey, K., Misra, R., Patowari, P., Dixit, U.Recent Advances in Mechanical Engineering January 2021 https://doi.org/10.1007/978-981-15-7711-6_23 Scopus
- Rajeev Nayan Gupta, A.P.Harsha, Tej Pratap: "Nanotechnology Driven Interventions in Biolubricant’s Tribology for Sustainability" T V V L N Rao, Salmiah Binti Kasolang, Guoxin Xie, Jitendra Kumar Katiyar, Ahmad Majdi Abdul RaniGreen Tribology: Emerging Technologies and Applications October 2021 Scopus
- Chandan G.K., Sahoo C.K: "Numerical Analysis on a Selection of Horn Material for the Design of Cylindrical Horn in Ultrasonic Machining" 2021 https://doi.org/10.1007/978-981-15-7711-6_14
- Himanshu Prasad Raturi, Subrata Kushari, S. Dey: "Radial Basis Function-Based Probabilistic First-Ply Failure Analyses of Composite Spherical Shells" K M Pandey, R.D. Misra, P. K. Patowari, U.S. DixitRecent Advances in Mechanical Engineering 2021
- Vaishali, S. Dey: "Temperature-Dependent Random Frequency of Functionally Graded Spherical shells—A PCE Approach" K M Pandey, R.D. Misra, P. K. Patowari, U.S. DixitRecent Advances in Mechanical Engineering 2021
- Singh D., Singh Y., Mukherjee M: "Behaviour of NiTi Based Smart Actuator for the Development of Planar Parallel Micro-Motion Stage" 2021
- Vivek Kumar Mishra, Subrata Bhowmik, Abhishek Paul, Ajay Yadav & Rajsekhar Panua: "ANFIS Prediction of Performance and Exhaust Emission Characteristics of CRDI Engine Fueled with Diesel-Butanol Strategies" K.M. Pandey, P.K. Patowari, R.D. Misra, U.S. DixitRecent Advances in Mechanical Engineering January 2021 https://doi.org/10.1007/978-981-15-7711-6_2 Scopus
- Vishwakarma S.K., Pati S., Kosti S.: "Numerical Analysis and Performance Evaluation of Cast Steel Based Sensible Heat Energy Storage System" Pinakeswar Mahanta, Pankaj Kalita, Anup Paul, Abhik BanerjeeAdvances in Thermofluids and Renewable Energy October 2021 10.1007/978-981-16-3497-0_45
- Pabi S., Mehta S.K., Pati S.: "Effect of Slip on Vortex Formation Near Two-Part Cylinder with Same Sign Zeta Potential in a Plane Microchannel" Prashant M. Pawar, R. Balasubramaniam, Babruvahan P. Ronge, Santosh B. Salunkhe, Anup S. Vibhute, Bhuwaneshwari MelinamathTechno-Societal 2020 May 2021 10.1007/978-3-030-69921-5_101
- Mehta S.K., Pati S.: "Thermo-Hydraulic Performance for an Electronic Cooling System Using Porous Material" Prashant M. Pawar, R. Balasubramaniam, Babruvahan P. Ronge, Santosh B. Salunkhe, Anup S. Vibhute, Bhuwaneshwari MelinamathTechno-Societal 2020 June 2021 10.1007/978-3-030-69925-3_20
- A. Borah, S. Pati: "Conjugate Heat Transfer Analysis for Flow Through Microduct Subjected to Non-uniform Heating" K.M. Pandey, R.D. Misra, P.K. Patowari, U.S. DixitRecent Advances in Mechanical Engineering January 2021 10.1007/978-981-15-7711-6_39
- D. K. Deka, G. C. Pal, S. Pati, P. R. Randive: "Natural Convection from Two Cylinders in an Enclosure with Sinusoidal Bottom Wall: A Numerical Study" K.M. Pandey, R.D. Misra, P.K. Patowari, U.S. DixitRecent Advances in Mechanical Engineering January 2021 10.1007/978-981-15-7711-6_36
- T. Sujith, S. K. Mehta, S. Pati: "Effect of Non-uniform Heating on Electroosmotic Flow Through Microchannel" K.M. Pandey, R.D. Misra, P.K. Patowari, U.S. DixitRecent Advances in Mechanical Engineering January 2021 10.1007/978-981-15-7711-6_50
- S. K. Mehta, S. Pati: "Effect of Non-uniform Heating on Forced Convective Flow Through Asymmetric Wavy Channel" K.M. Pandey, R.D. Misra, P.K. Patowari, U.S. DixitRecent Advances in Mechanical Engineering January 2021 10.1007/978-981-15-7711-6_34
- Dutta S., Pati S.: "Influence of Thermal Radiation on Natural Convection in a Square Enclosure" Prashant M. Pawar, R. Balasubramaniam, Babruvahan P. Ronge, Santosh B. Salunkhe, Anup S. Vibhute, Bhuwaneshwari MelinamathTechno-Societal 2020 June 2021 10.1007/978-3-030-69925-3_51
- P. Sandeep Varma, Subrata Bhowmik, Abhishek Paul, Pravin Ashok Madane & Rajsekhar Panua: "AI-Based ANN Modeling of Performance–Emission Profiles of CRDI Engine under Diesel-Karanja Strategies" K.M. Pandey, R.D. Misra, P.K. Patowari, U.S. DixitRecent Advances in Mechanical Engineering January 2021 https://doi.org/10.1007/978-981-15-7711-6_1 Scopus
2020
- Sudipta Halder, Nazrul Islam Khan: "Self-healing fiber-reinforced polymer composites for their potential structural applications" Sabu ThomasSelf-Healing Polymer Based Systems 2020 https://doi.org/10.1016/B978-0-12-818450-9.00015-5
- P. K. Karsh, A. Kumar, S. Dey: "Polynomial neural network based stochastic natural frequency analysis of functionally graded plates" Subashisa Dutta, Esin Inan, Santosha Kumar DwivedyAdvances in Structural Vibration 2020
- Vaishali, S. Dey: "Support Vector Model Based Thermal Uncertainty on Stochastic Natural Frequency of Functionally Graded Cylindrical Shells" Sandip Kumar Saha, Mousumi MukherjeeRecent Advances in Computational Mechanics and Simulations 2020
- R. R. Kumar, T. Mukhopadhyay, K. M. Pandey, S. Dey: "Quantifying Uncertainty in Structural Responses of Polymer Sandwich Composites: A Comparative Analysis of Neural Networks" S. Adhikari, A. Dutta, S. ChoudhuryAdvances in Structural Technologies 2020
- R.R. Kumar, Tanmoy Mukhopadhyay, K.M. Pandey, S. Dey: "Prediction capability of polynomial neural network for uncertain buckling behavior of sandwich plates" Pijush Samui, Dieu Tien Bui, S. Chakraborty, Ravinesh C. DeoHandbook of Probabilistic Models 2020
- S. Kushari, A. Chakraborty, T. Mukhopadhyay, S.R. Maity, S. Dey: "ANN-Based Random First-Ply Failure Analyses of Laminated Composite Plates" Sandip Kumar Saha, Mousumi MukherjeeRecent Advances in Computational Mechanics and Simulations 2020
- D. Bhowmick, P.R. Randive, S. Pati: "Effect of thickness of porous layer on thermo-hydraulic characteristics and entropy generation in a partially porous wavy channel" B. B. Biswal, Bikash Kumar Sarkar, P. MahantaAdvances in Mechanical Engineering January 2020 10.1007/978-981-15-0124-1_13
- Subrata Kushari, A. Chakraborty, T. Mukhopadhyay, S. R. Maity & S. Dey: "ANN-based random first-ply failure analyses of laminated composite plates" Recent Advances in Computational Mechanics and Simulations 2020
- B. K. Kanchan, P. R. Randive, S. Pati: "Numerical Investigation on the Influence of Reactant Gas Concentration on the Performance of a PEM Fuel Cell" Manaswita Bose, Anish ModiProceedings of the 7th International Conference on Advances in Energy Research October 2020 10.1007/978-981-15-5955-6_159
2019
- P. K. Karsh, T. Mukhopadhyay, S. Dey: "A stochastic investigation of effect of temperature on natural frequencies of functionally graded plates" S. Adhikari, B. Bhattacharjee, J. BhattacharjeeAdvances in Structural Engineering and Rehabilitation 2019
- Prosun Mandal, Subhas Chandra Mondal: "Investigation on the performance of copper-coated 6061 aluminium alloy electrode in electric discharge machining" Chakrabarti, A.Research into Design for a Connected World: Proceedings of ICoRD 2019 January 2019 https://doi.org/10.1007/978-981-13-5974-3_30 Scopus
- Chiranjib Bhowmik, Sumit Bhowmik and Amitava Ray: "Optimum Selection of Biodiesel for Sustainable Assessment: A Prospect Theory-Based Approach" Advanced Multi-Criteria Decision Making for Addressing Complex Sustainability Issues 2019 https://doi.org/10.4018/978-1-5225-8579-4.ch005 Scopus
- Bipul Das: "Design of mixed mode dryer for spices for rural applications" B Kakati, D BoraAdvances in Science and Technology August 2019 Others
- Rahul Kumar, Sumit Bhowmik and Rahul Jayasval: "Influence of drilling parameters on the thrust force and mechanical properties of biodegradable particleboard composite panels: A review" Kaushik Kumar and J. Paulo DavimBiodegradable Composites: Materials, Manufacturing and Engineering 2019 https://doi.org/10.1515/9783110603699-008
- Jagadish, and Sumit Bhowmik: "Parameters Optimization of FDM for the Quality of Prototypes Using an Integrated MCDM Approach" K. Kumar, D. Zindani, and J. DavimAdditive Manufacturing Technologies From an Optimization Perspective 2019 https://doi.org/10.4018/978-1-5225-9167-2.ch010
- Biplab Chatterjee, Sumit Bhowmik: "Evolution of Material Selection in Commercial Aviation Industry – A Review" Sustainable Engineering Products and Manufacturing Technologies 2019 https://doi.org/10.1016/B978-0-12-816564-5.00009-8 Scopus
- B. Mondal, S. Pati, P. K. Patowari: "Influence of confluence angle between inlets on the mixing performance of micromixer with obstacles" Prashant M. Pawar, Babruvahan P. Ronge, R. Balasubramaniam, Anup S. Vibhute, Sulabha S. ApteTechno-Societal 2018 November 2019 10.1007/978-3-030-16962-6_28
- B. Mondal, S. Pati, P. K. Patowari: "Numerical analysis of mixing performance in microchannel with different ratio of outlet to inlet width" Prashant M. Pawar, Babruvahan P. Ronge, R. Balasubramaniam, Anup S. Vibhute, Sulabha S. ApteTechno-Societal 2018 November 2019 10.1007/978-3-030-16962-6_26
- S. Dutta, A. K. Biswas, S. Pati: "Numerical Analysis of Heat Transfer and Entropy Generation for Natural Convection in a Quadrantal Cavity with Non-uniform Heating at the Bottom Wall" Prasanta Sahoo, J. Paulo DavimAdvances in Materials, Mechanical and Industrial Engineering January 2019 10.1007/978-3-319-96968-8_23
- Jagadish, Sumit Bhowmik, and Suresh Gudala: "Hybrid Multi-Criteria Decision-Making Optimization Strategy for RP Material Selection: A Case Study" P. SahooOptimizing Current Strategies and Applications in Industrial Engineering 2019 https://doi.org/10.4018/978-1-5225-8223-6.ch015
- Faisal, Nadeem, Sumit Bhowmik, and Kaushik Kumar: "Recent Developments in Wire Electrical Discharge Machining" K. Kumar, N. Kumari, and J. DavimNon-Conventional Machining in Modern Manufacturing Systems 2019 https://doi.org/10.4018/978-1-5225-6161-3.ch006
2018
- Nadeem Faisal, Divya Zindani, Kaushik Kumar and Sumit Bhowmik: "Laser micromachining of engineering materials – A review" Kaushik Kumar, Divya Zindani, Nisha Kumari, J. Paulo DavimMicro and Nano Machining of Engineering Materials September 2018 https://doi.org/10.1007/978-3-319-99900-5_6
- Rahul Kumar and Sumit Bhowmik: "Development of Natural Bio-Filler based epoxy composite for wind turbine blade application" Kaushik Kumar and J. Paulo DavimDesign and Optimization of Mechanical Engineering Products February 2018 10.4018/978-1-5225-3401-3.ch009 Scopus
- P. K. Karsh, T. Mukhopadhyay, S. Dey: "Fuzzy based frequency response function analysis of functionally graded plates" Paolo Davim and K. KumarHierarchical Composite Materials 2018
- Sumit Bhowmik and Jagadish: "Multi-Criteria Decision Making for Optimization of Product Development Under Green Manufacturing Environment" K. Kumar and J. Paulo DavimDesign and Optimization of Mechanical Engineering Products 2018 https://doi.org/10.4018/978-1-5225-3401-3.ch012
- Divya Zindani, Saikat Ranjan Maity, and Sumit Bhowmik: "A Decision-Making Approach for Material Selection of Polymeric Composite Bumper Beam" K. Kumar and J. Paulo DavimComposites and Advanced Materials for Industrial Applications 2018 https://doi.org/10.4018/978-1-5225-5216-1.ch006
2017
- Sumit Bhowmik, Jagadish, and Amitava Ray: "Abrasive Water Jet Machining of Composites Materials" Dr. Kapil GuptaAdvanced Manufacturing Technologies May 2017 https://doi.org/10.1007/978-3-319-56099-1
2016
- Supriyo Roy, Sumit Bhowmik, J. Paulo Davim, and Kaushik Kumar: "Estimation of Mechanical and Tribological Properties of Epoxy Based Green Composites" Green Approaches to Biocomposite Materials Science and Engineering June 2016 10.4018/978-1-5225-0424-5.ch005 Scopus
2015
- Chinmaya Kumar Sahoo, Jageshwar Kumar Sahu, and Manoj Masanta: "“Effect of Pulsed Nd: YAG Laser Parameters in Preplaced TiC Coating on Aluminium Substrate.”" Lasers Based Manufacturing 2015
- Choudhury R., Singh D., Kumar A., Singh Y., Sahoo C.K: "Development and Workspace Study of a 4-PP Planar Parallel XY Positioning Stage Using SMA Actuators." 2015
- Bipul Das, Sukhomay Pal, Swarup Bag: "Monitoring weld quality in friction stir welding based on spindle speed and motor current signals" Narayanan, R., Dixit, U.Advances in Material Forming and Joining April 2015 https://doi.org/10.1007/978-81-322-2355-9_12 Scopus
2012
- S. Dey, A. Karmakar: "Natural frequencies of bending and torsion stiff composite conical shells with delamination" S. Bandopadhyay, G. S. Kumar and Palaniappan RamuMachines and Mechanisms, NaCoMM 2011 (IFToMM) 2012
- Sudipta Halder, A.K. Panda, Amitava Mitra, Amitava Basu Mallick: "Crystallization Behavior and Curie Temperature Properties of Al Doped Nd-Fe-B Based Nanocomposite Permanent Magnet" B.S.S. Daniel and G.P. ChaudhariAdvances in Materials and Processing November 2012 https://doi.org/10.4028/www.scientific.net/AMR.585.149





