Dr.Sumit Bhowmik

Information

  • Designation : Associate Professor
  • Email : sumit@mech.nits.ac.in
  • Phone :

Key Notes

  • Conference: International - 54 , National - 7
  • Journals: 73
  • Conferences: 61
  • Book Chapters: 13
  • Books: 3
  • Patents: 3
  • PhD: Guided: 12
  • Post Graduates: Guided: 21
  • Under Graduates: Guided: 18

150

PUBLICATIONS

12

DOCTORAL STUDENTS

3

PATENTS

2

PROJECTS

Introduction [Biosketch]

  • Dr. Sumit Bhowmik received his B.E. degree in Mechanical Engineering from Tripura Engineering College (now known as NIT Agartala) under Tripura University and his M.M.E. degree in Machine Design specialization from Jadavpur University. He has done his Ph.D. from Jadavpur University. He joined as an Assistant Professor in the Department of Mechanical Engineering at the National Institute of Technology Silchar, in January 2013. He was also a faculty member at Tripura Engineering College and Asansol Engineering College. He has published more than 120 journal articles and conference papers in various reputed journals and conferences. Also, he is the author of three books and three patents. He also published a number of book chapters. Under his supervision, ten (10) research scholars and twenty (20) PG students successfully completed their research work, and three research scholars are now working under supervision. His work is also funded by the DST, CPRI, and KVIC.

Areas of Interest

  • Composite materials: Development and Synthesis;
  • Fatigue and Fracture;
  • Multi-criteria Decision Making Technique;
  • Optimization Techniques;
  • Renewable Energy: Energy Management

Institution Year Degree
Jadavpur University 2014 Ph.D.
Jadavpur University 2004 M. M. E. (Mechanical Engineering: Machine Design)
Tripura Engineering College (now NIT Agartala) 1999 B. E. (Mechanical Engineering)

Teaching Experience
Associate Professor
5 July 2022 - Present
NIT Silchar

S. Purkayashta, S. Kumar, N. Chauhan, and S. Bhowmik, “The effects of treated rice-husk bio-filler at different weight fraction on tribological chracteristics of sustainable composites”, In Proceedings 2nd International Conference on Mechanical Engineering (INCOM 2024), January 5th 2024, 2024, Department of Mechanical Engineering, Jadavpur University, Kolkata, West Bengal, India

B. P. Hazam, V.K. Mahakur, N. Chauhan, and S. Bhowmik, “Experimenatl and ANN evaluation on tribological performance of corn husk filler based composites”, In Proceedings 2nd International Conference on Mechanical Engineering (INCOM 2024), January 5th 2024, 2024, Department of Mechanical Engineering, Jadavpur University, Kolkata, West Bengal, India

Atul Kumar, Devendra Kumar, Santosh Kumar, and Sumit Bhowmik, “Corrosion performance of banana peel based epoxy polymer composite”, In Proceedings 2nd International Conference on Mechanical Engineering (INCOM 2024), January 5th 2024, 2024, Department of Mechanical Engineering, Jadavpur University, Kolkata, West Bengal, India

Ananya Kalita, Vijay Kumar Mahakur, and Sumit Bhowmik, “Numerical analysis of coir filler based polymeric composites for evaluating the flexural performance”, In Proceedings 2nd International Conference on Mechanical Engineering (INCOM 2024), January 5th 2024, 2024, Department of Mechanical Engineering, Jadavpur University, Kolkata, West Bengal, India

A. Siva Nagaraju, Rajat Gupta, and Sumit Bhowmik, “Experimental study on the Influence of Aspect Ratio and Triangular Dimple on Blades of H-Darrieus Wind Rotor on Self-Starting Capability”, In Proceedings 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2024), February 2nd 2024, 2024, Department of Mechanical Engineering, NIT Silchar, Assam

Tamanna Dey, Santosh Kumar, and Sumit Bhowmik, “Assessment of the mechanical characteristics of a polymeric composite reinforced with rice husk filler”, In Proceedings 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2024), February 2nd 2024, 2024, Department of Mechanical Engineering, NIT Silchar, Assam

Ananya Kalita, Vijay Kumar Mahakur, and Sumit Bhowmik, “Numerical investigation of bamboo filler based epoxy polymer composites to evaluate its mechanical properties”, In Proceedings 5th International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2024), February 2nd 2024, 2024, Department of Mechanical Engineering, NIT Silchar, Assam

Atul Kumar, Devendra Kumar, Santosh Kumar, and Sumit Bhowmik, “Effect of Different Constraint on Tribological Behaviour of Banana Peel Reinforced Polymeric Composites Under Heated Contact Condition”, In Proceedings International Conference on Sustainable Research in Energy and Environment (SREE-2024), April 5th 2024, 2024, Department of Chemical Engineering & Centre for Energy and Environment, Dr B R Ambedkar National Institute of Technology Jalandhar, Punjab, India

Nibedita Debnath, Tamanna Dey, Santosh Kumar, and Sumit Bhowmik, “Investigation on the tribological characteristics of treated rice husk filler based bio-epoxy composites”, In Proceedings International Conference on Sustainable Research in Energy and Environment (SREE-2024), April 5th 2024, 2024, Department of Chemical Engineering & Centre for Energy and Environment, Dr B R Ambedkar National Institute of Technology Jalandhar, Punjab, India

Tamanna Dey, Nibedita Debnath, Santosh Kumar, and Sumit Bhowmik, “Evaluation of the corrosion performance of a polymeric composite enhanced with rice husk filler”, In Proceedings International Conference on Sustainable Research in Energy and Environment (SREE-2024), April 5th 2024, 2024, Department of Chemical Engineering & Centre for Energy and Environment, Dr B R Ambedkar National Institute of Technology Jalandhar, Punjab, India

Ananya Kalita and Sumit Bhowmik, “Evaluation of the tribological behaviour of graphene nanoplatelets and Jute micro filler based bio-epoxy hybrid composites”, In Proceedings International Conference on Sustainable Research in Energy and Environment (SREE)-2024, April 5th 2024, 2024, Department of Chemical Engineering & Centre for Energy and Environment, Dr B R Ambedkar National Institute of Technology Jalandhar, Punjab, India, Ranking Best Presentation Award – Ananya Kalita

Ananya Kalita, Anurag Debnath and Sumit Bhowmik, “Investigation of Corrosion Resistance in Graphene Nanoplatelets and Jute Micro FillerReinforced Bio-epoxy Hybrid Composites”, In Proceedings 2024 IEEE 8th Students Conference on Engineering and Systems (SCES), June 21st 2024, 2024, Department of Electrical Engineering, Motilal Nehru National Institute of Technology Allahbad, Prayagraj, India, Ranking Best Paper Awarded

Sahidul Alam, Jintu Das, Bornil Buragohain, and Sumit Bhowmik, “Numerical Investigation of the Variation in Temperature of Lithium-Ion Cell with Different Beeswax Thickness and Cell Radius and the Enclosure Thickness for Optimal Thermal Control”, In Proceedings 4th International Conference on Modeling, Simulation and Optimization (CoMSO 2024), November 16th 2024, 2024, NIT Silchar

Sahidul Alam, and Sumit Bhowmik., “Comparative Numerical Investigation of the Effectiveness of Beeswax Use as Phase Change Material in a Single Cylindrical Cell Model for the Thermal Control of Lithium-Ion Battery”, In Proceedings 4th International Conference on Modeling, Simulation and Optimization (CoMSO 2024), November 16th 2024, 2024, NIT Silchar

Sl.No Course Name Semester Course Code Duration Status
1 Machine Design - II B.Tech ME 307 January - June 2025 Ongoing
2 Machine Design Laboratory B.Tech ME 316 January - June 2025 Ongoing
3 Machine Design - I B.Tech ME 302 July - December 2024 Completed
4 Fundamentals of Industrial design B.Tech ME 433 July - December 2024 Completed
5 Mechanics of Solid B.Tech ME 208 January - June 2024 Completed
6 Non Destructive Testing of Materials M.Tech ME 5134 January - June 2024 Completed
7 Machine Design - I B.Tech ME 302 July - December 2023 Completed
8 Fundamentals of Industrial design B.Tech ME 433 July - December 2023 Completed
9 Mechanics of Solids B.Tech ME 208 January - June 2023 Completed
10 Non Destructive Testing of Materials M.Tech ME 5134 January - June 2023 Completed
11 Machine Design Lab B.Tech ME 316 January - June 2023 Completed
12 Machine Design - I B.Tech ME 302 July - December 2022 Completed
13 Fundamentals of Industrial Design B.Tech ME 433 July - December 2022 Completed
14 Mechanics of Solid B.Tech ME 208 January - June 2022 Completed
15 Machine Design I B.Tech ME 302 July - December 2021 Completed
16 Mechanics of Solid B.Tech ME 208 January - June 2021 Completed
17 Machine Design II B.Tech ME 307 January - June 2021 Completed
18 Machine Design-I B.Tech ME 302 July - December 2020 Completed
19 Structural Property correlation of Engineering Materials M.Tech ME 5302 July - December 2020 Completed
20 Seminar M.Tech ME 5210 July - December 2020 Completed
21 Theory Machine B.Tech ME 202 July - December 2019 Completed
22 Engineering Mechanics B.Tech ME 101 July - December 2019 Completed
23 Engineering Mechanics B.Tech ME 101 January - June 2019 Completed
24 Engineering Mechanics B.Tech ME 101 January - June 2019 Completed
25 Mechanics of Solid B.Tech ME 208 January - June 2020 Completed
26 FEM in Engineering Applications M.Tech ME 1505 January - June 2020 Completed

Anurag Kakati, Kumar Bardhan, Mirganka Sekhar Borah, Sukladihwaj Roy Pradhani, and Kamaleswar Deka
Completed :  31 May 2014
Supervisor : Sumit Bhowmik

Dheeraj Rastogi, Saptashwa Ghosh, Jeetendra Kumar, Dharmendra Gupta, and Mounik Sethia
Completed :  31 May 2015
Supervisor : Sumit Bhowmik

Himangshu Sekhar Bharali, Angshuman Biswas, Gunotpal Dutta, Pranab Bhowal and Indrajit Baruah
Completed :  31 May 2016
Supervisor : Sumit Bhowmik

Shubham Agarwal, Rajat Sethi, and Nishibonya Kakoti
Completed :  31 May 2017
Supervisor : Sumit Bhowmik

Deepak Kumar Srivastava, Abhishek Sharma, and Abhinav Raj
Completed :  31 May 2017
Supervisor : Sumit Bhowmik

Bibek Sagar Gupta, Deepak Krishna Shukla, and Rahul Kumar Ranjan
Completed :  31 May 2018
Supervisor : Sumit Bhowmik

Gunamani Nath, Jyotishman Haloi, and Kangkan Jyoti Baishya
Completed :  31 May 2018
Supervisor : Sumit Bhowmik

Rajkishor Pradhan, Sumit Kumar, and Rahul Kumar
Completed :  31 May 2019
Supervisor : Sumit Bhowmik

Niraj Kumar, Pawan Kumar Singh, and Aman Bharti
Completed :  31 May 2019
Supervisor : Sumit Bhowmik

Dipu Das, Anupam Das, Alongbar Boro, and Koushik Kashyap Saikia
Completed :  31 May 2020
Supervisor : Sumit Bhowmik

Ripunjoy Sarma, Rohan Datta Purkayastha, Uttaran Saikia and Subhasish Chakraborty
Completed :  31 May 2021
Supervisor : Sumit Bhowmik

Devendra Samsukha, Nitya Chandak and Priyanka Jhajhra
Completed :  31 May 2022
Supervisor : Sumit Bhowmik

Investigation of Physiochemical Properties of Epoxy Composites fabricated using Electroless Ni-P Hemp Filler Reinforcement

Youshita Mehra; Geetakshi Teli; Arjoika Paul and Devjani Devi
Completed :  31 May 2022
Supervisor : Sumit Bhowmik
Co Supervisor : Abhishek Paul

Vishwajeet Niranjan Kant; Swapnil Panda; Pratyush Rai and Vivek Singh
Completed :  31 May 2023
Supervisor : Sumit Bhowmik
Co Supervisor : Dipankar Bhanja

Electroless Ni-P Treatment on Jute Filler Epoxy Composite

Hemanga Nath; Harit Prabaal Das; Pawan Gupta and Karishmita Malakar
Completed :  31 May 2023

Development of banana peel reinforced composite and evaluation of its structural, physical, tribo-mechanical and corrosion behaviour

Devendra Kumar and Atul Kumar
Completed :  31 May 2024
Supervisor : Sumit Bhowmik

Development of ricehusk filler reinforced polymer composite and evaluation of its physio-mechanical behaviour

Tamanna Dey and Nibedita Debnath
Completed :  31 May 2024
Supervisor : Sumit Bhowmik

Tribo-mechanical characterization of graphene nanoplatelets and jute micro filler based Bio-epoxy hybrid composites

Ananya Kalita and Anurag Debnath
Completed :  31 May 2024
Supervisor : Sumit Bhowmik

Estimation of Critical Fracture Toughness for Ductile Failure of RPV Steel using Tensile Test Data

Ajit Biswas
Completed :  31 May 2014
Supervisor : Sumit Bhowmik
Co Supervisor : Darpa Hari Das

Faruque Aziz
Completed :  31 May 2014
Supervisor : Sumit Bhowmik

Exerimental Study and Optimization of Mechanical Properties of Epoxy based Wood Dust reinforced Green Composite

Rahul Kumar
Completed :  31 May 2014
Supervisor : Sumit Bhowmik

Estimation and Analysis of Fatigue Behaviour of Wood Dust Reinforced Epoxy Composite

Barnasree Chanda
Completed :  31 May 2015
Supervisor : Sumit Bhowmik

Application of Virtual Manufacturing concept to Develop the Universal Testing Machine and Testing Procedure

Sumit Kumar Sinha
Completed :  31 May 2015
Supervisor : Sumit Bhowmik

Gupta Ganesh Mallu
Completed :  31 May 2015
Supervisor : Sumit Bhowmik

Chaiki Malakar
Completed :  31 May 2016
Supervisor : Sumit Bhowmik

Fabrication of Coir Filler Reinforced Epoxy Composite and its response towards Cyclic Loading

Faladrum Sharma
Completed :  31 May 2016
Supervisor : Sumit Bhowmik

Pran Jyoti Saikia
Completed :  31 May 2017
Supervisor : Sumit Bhowmik

Rahul Jayasval
Completed :  31 May 2017
Supervisor : Sumit Bhowmik

Gaurav Kumar
Completed :  31 May 2017
Supervisor : Sumit Bhowmik

C. Bhargav
Completed :  31 May 2018
Supervisor : Sumit Bhowmik

Mehta Kandarp Jaydevbhai
Completed :  31 May 2018
Supervisor : Sumit Bhowmik

Investigation of Mechanical Properties of Natural Fiber Reinforced Polymer Composite Material: Application in Orthopaedic Implants and Bone Grafting

Santosh Kumar
Completed :  31 May 2019
Supervisor : Sumit Bhowmik

Micromechanical Analysis of Pineapple Leaf Filler-Fiber Hybrid Composite and Comparative study with Palf Reinforced Composite

Abir Saha
Completed :  31 May 2019
Supervisor : Sumit Bhowmik

Munjula Siva Kumar
Completed :  31 May 2019
Supervisor : Sumit Bhowmik

Barun Barman
Completed :  31 May 2020
Supervisor : Sumit Bhowmik

Kshounish Brahma
Completed :  31 May 2020
Supervisor : Sumit Bhowmik

Navneet Kumar Thakur
Completed :  31 May 2022
Supervisor : Sumit Bhowmik

Prashanthkumar I Hadi
Completed :  31 May 2023
Supervisor : Sumit Bhowmik
Co Supervisor : Rajeev N Gupta

Nobojyoti Chauhan
Completed :  31 May 2024
Supervisor : Sumit Bhowmik

Textile Waste

Nobojyoti Chauhan
Enrolled: 6 August 2024
Ongoing
Supervisor : Sumit Bhowmik
Academic Year : 2024-2025

Wind Turbine

A. Siva Nagaraju
Enrolled: 31 August 2021
Ongoing
Supervisor : Sumit Bhowmik
Co Supervisor : Rajat Gupta

Development of naturally derived green composites: Characterization and design analysis of biomaterials for prosthetic limb application

Santosh Kumar
Enrolled: 23 July 2019
Completed :  12 June 2024
Supervisor : Sumit Bhowmik

Development of jute filler reinforced composite and evaluation of its mechanical and machinability behaviour

Vijay Kumar Mahakur
Enrolled: 24 July 2019
Completed :  30 May 2024
Supervisor : Sumit Bhowmik
Co Supervisor : Promod Kumar Patowari

Development and assessment of organic based composite phase change material for thermal energy storage

Durgesh Kumar Mishra
Enrolled: 30 August 2017
Completed :  1 May 2023
Supervisor : Sumit Bhowmik
Co Supervisor : Krishna Murari Pandey

Effect of different parametric constrain on tribological behaviour of natural micro filler reinforced epoxy composite

Rajdeep Paul
Enrolled: 21 July 2017
Completed :  7 February 2023
Supervisor : Sumit Bhowmik

Synthesis of lean steel powder metallurgical components for mechanical properties and machinability behaviour

Bhosale Shrikrushna Babasaheb
Enrolled: 24 July 2013
Completed :  22 August 2022
Supervisor : Sumit Bhowmik
Co Supervisor : Amitava Ray

Prospect Theory Based Decision Making Approaches for Green and Sustainable Technologies: A Material Selection Perspective

Divya Zindani
Enrolled: 8 September 2016
Completed :  26 July 2021
Supervisor : Saikat Ranjan Maity
Co Supervisor : Sumit Bhowmik

Experimental investigation for thermomechanical behaviour of hybrid filler reinforced epoxy composite

Krushna Gouda
Enrolled: 21 February 2018
Completed :  6 February 2021
Supervisor : Sumit Bhowmik
Co Supervisor : Biplab Das

Investigation of green energy source selection for sustainable planning

Chiranjib Bhowmik
Enrolled: 7 July 2014
Completed :  4 September 2019
Supervisor : Sumit Bhowmik
Co Supervisor : Amitava Ray

Experimental investigation of static and dynamic mechanical properties of lingocellosic particle filler reinforced epoxy composite under diverse constraint

Rahul Kumar
Enrolled: 7 July 2014
Completed :  9 January 2019
Supervisor : Sumit Bhowmik

Development of Green Manufacturing Strategies for Process Parameter Optimization on Processing of Metallic and Polymeric Materials

Jagadish
Enrolled: 26 July 2013
Completed :  21 August 2017
Supervisor : Sumit Bhowmik
Co Supervisor : Amitava Ray

System for producing jute-filler composites and studying the drilling performance of the produced composites

“A SYSTEM FOR STUDYING AND PERFORMING THE PART-OF-SPEECH TAGGING FOR MIZO LANGUAGE”

Germany
Patent Registration ID, 202024100047
System for producing jute-filler composites and studying the drilling performance of the produced composites, (**GRANTED**)

A system for the development of prosthetic knee legs from naturally derived biocomposite

“A SYSTEM FOR STUDYING AND PERFORMING THE PART-OF-SPEECH TAGGING FOR MIZO LANGUAGE”

Germany
Patent Registration ID, 202023103875
A system for the development of prosthetic knee legs from naturally derived biocomposite, (**GRANTED**)

System and method for developing gift and memento items from hemp filler

“A SYSTEM FOR STUDYING AND PERFORMING THE PART-OF-SPEECH TAGGING FOR MIZO LANGUAGE”

India
Patent Registration ID, 422983
System and method for developing gift and memento items from hemp filler, (**GRANTED**)

Sl.No: 1

Title Of Research Project: " Experimental and computational analysis of heat sink application for optimal performance by developing low-cost natural filler reinforced the composite material "

Sponsored By: CPRI, MoP, Govt. of India

Overall Budget: Rs 22.63 Lakhs

Status: Completed

Principal Investigator: Sumit Bhowmik

Co Principal Investigator: Biplab Das

Sl.No: 2

Title Of Research Project: " Utilization of Agro waste for development of bio composite materials for domestic appliances "

Sponsored By: KVIC, Govt. of India

Overall Budget: Rs 15.00 Lakhs

Status: Ongoing

Principal Investigator: Sumit Bhowmik

Professional Memberships:

  1. Member: Institute of Engineers (India)
  2. Member: Society of Polymer Science (India)

Internship: External Students

  1. Mr. Biki Prasad Hazam, 6th Semester, Department of Mechanical Engineering, North Eastern Regional Institute of Science and Technology (NERIST), June – July, 2023
  2. Mr. Soumya Purkayastha, 5th Semester, Department of Mechanical Engineering, Haldia Institute of Technology, West Bengal, July – August 2023.

Student’s Achivement:

  • Ms. Ananya Kalita (Batch 2020 – 2024), Received Gold Medal for “Best All Round Graduate” – 22nd Convocation 2024, NIT Silchar.

  • Mr. Sahidul Alam (Batch 2021 – 2025),  Received 1st Prize in Oral Presentation in ASME EFx at NIT Silchar on August 3rd 2024 – Development and Investigation of hybrid beeswax based phase change materials for thermal controlled storage applications.

  • Received “Best Paper Award” – A. Kalita, A. Debnath, and S. Bhowmik, 2024, Investigation of Corrosion Resistance in Graphene Nanoplatelets and Jute Micro Filler Reinforced Bio-epoxy Hybrid Composites IEEE 8th Students Conference on Engineering and Systems (SCES), June 21-23, 2024, Department of Electrical Engineering, Motilal Nehru National Institute of Technology Allahbad, Prayagraj, India.

  • Ms. Ananya Kalita (Batch 2020 – 2024), Received “Best Paper Presentation Award” –A. Kalita and S. Bhowmik,  Evaluation of the tribological behaviour of graphene nanoplatelets and Jute micro filler based bio-epoxy hybrid composites, International Conference on Sustainable Research in Energy and Environment (SREE)-2024, 5th – 6th April 2024, Jointly organized by Department of Chemical Engineering & Centre for Energy and Environment, Dr. B. R. Ambedkar National Institute of Technology Jalandhar, Punjab, India, Sponsored by Royal Society of Chemistry.

  • Ms. Geetakshi Teli (Batch 2018 – 2022), Received Gold Medal for “Best All Round Graduate” – 20th Convocation 2022, NIT Silchar.

Invited Talk/ Keynote:

  1. Guest Lecture in “Industry-Academia One-day seminar”  is organized on the theme ‘Role of Engineers in Advancing Science and Technology for Sustainable Development’ of “World Engineering Day 2025”, 8th March 2025, Organized by Institute of Engineers (I), Silchar Local Centre at NIT Silchar, Assam.
  2. Keynote talk in “6th International Congress on Advances in Mechanical Science” July 26th – 27th, 2024, Department of Mechanical Engineering, Vardhaman College of Engineering, Hyderabad, Telangana.
  3. Expert talk in “Innovation, Design, and Entrepreneurship (IDE) Boot Camps”, 9th – 10th April 2024, Tapesia Campus, Assam Don Bosco University, Guwahati.
  4. Expert talk in A 5 day Faculty Development Program on “Industry 4.0: Technological Evaluation” 1st – 5th April 2024, Department of Mechanical Engineering, Techno College of Engineering, Agartala, Tripura.
  5. Keynote talk in “2nd International Conference on Recent and Advanced Composite Materials (ICRACM-2023)” 22nd – 24th February 2023, Centre for Composites and Advanced Materials, Department of Mechanical Engineering, SRM Institute of Science & Technology, Kattankulathur Campus.
  6. Expert talk in Science & Engineering Research Board (SERB) under the Accelerate Vigyan Scheme high end workshop “Emerging trends in Material Science & Engineering for its Applications in Manufacturing Sector” 24th – 30th June 2023, Department of Mechanical Engineering, National Institute of Technology Silchar, Assam, India.
  7. Expert Talk in AICTE sponosred Online AICTE-ISTE Induction/ Refresher Progrmmes 2021-2022 on “Recent Advances in Materials Science and Engineering” 18th – 24th January 2022, Department of Mechanical Engineering, SVERI’s College of Engineering, Pandharpur Solapur, Maharashtra.
  8. Expert Talk in Online Short Term Training Program on “Advances in Mechanical, Industrial Engineering & Management (AMIEM-2021)” 9th – 13th March 2021, Department of Mechanical Engineering, NIT Raipur and Department of Mechanical Engineering, Vishwavidyalaya Engg College Lakhanpur.
  9. Expert talk on “Polymer Materials: Development and Manufacturing” One week online short term course on “Innovation and Research in Welding, Joining and Cutting Technology” 07th – 11th September 2020, Department of Mechanical Engineering, National Institute of Technology Silchar, Assam.
  10. Expert talk on “Selection of materials and resources for renewable energy” One week online short term course on “How to define Research Problems and Solving Methods in Sustainable Design, Manufacturing and Energy Engineering” 24th – 28th August 2020, Department of Mechanical Engineering, National Institute of Technology Silchar, Assam.
  11. Expert talk on “Polymer materials for electrical and electronic applications” One Week Webinar on “Nano-Elecro-Mechanical System NEMS Technologies: Modern Interdisciplinary Approach in Engineering (NEMSTech 2020)” 17th – 21st August 2020, Department Mechanical Engineering and Department of Electronics and Instrumentation Engineering, National Institute of Technology Silchar, Assam.
  12. Expert talk on “Recent Trends of Tribological Behaviour of Natural Filler/Fibre Reinforced Polymeric Composite Materials” One Week Online Workshop on “Interdisciplinary Approach of Tribology in Engineering and Biomedical Research” 04th – 08th August 2020, Department of Mechanical Engineering, National Institute of Technology Silchar, Assam.
  13. Invited talk on “Green Composites: An Insight into Development, Mechanical Properties and Characterization” International Symposium on Sustainable Polymers, 23rd – 25th August 2019, IIT Guwahati, Assam, India.
  14. Session Chair, 10th International Conference on Sustainable Energy and Environmental Protection (June 27th – 30th, 2017, Bled, Slovenia).
  15. Invited talk on “Fracture behaviour of Ferritic Steel under elevated temperature” One Week Self-Financed Short Term Training Program on Advances in Manufacturing Technique, 27th February to 2nd March 2016, NIT Silchar, Assam, India.

Workshop/STTP/Seminar: Organized and Attended

Organized

  1. Three-day National workshop on “Self-employement through Enterprnuership – The path for self reliant India” funded Indian National Academy of Engineering (INAE) in Department of Mechanical Engineering, NIT Silchar from 26th to 28th July 2023, Coordinator: Prof. R. Gupta and Dr. S. Bhowmik.
  2. Five-day workshop on “Development and utilization of renewable resources for Industry 4.0” funded Entrepreneurship and Skill Development Scheme, Ministry of Micro, Small and Medium Enterprise in Department of Mechanical Engineering in association with Institute’s Innovation Council, NIT Silchar from 9th to 13th March 2023, Coordinator: Dr. S. Bhowmik and Prof. R. Gupta.
  3. One day workshop cum training program on “Application of composite material for household applications” funded by KVIC, 08th November 2022, Department of Mechanical Engineering, National Institute of Technology Silchar, Coordinator: Dr. S. Bhowmik.
  4. Regional Seminar on “Renewable Energy Technology: Issues and Prospects” (RETIP – 2017), 25/09/2017, Department of Mechanical Engineering, National Institute of Technology Silchar under TEQIP – III, Coordinator: Dr. B. Das, Dr. A. Biswas, Dr. S. Bhowmik.
  5. One Week GIAN Course on “Surface Engineering”, 13.09.2016 – 17.09.2016, Department of Mechanical Engineering, National Institute of Technology Silchar under GIAN, MHRD, Coordinator: Dr. P. K. Patowari, Dr. S. Bhowmik.
  6. One Week Workshop on “Advanced Joining Technology”, Faculty Development Program , 17/10/2016 – 21/10/2016 , Department of Mechanical Engineering, National Institute of Technology Silchar under TEQIP – II, Coordinator: Dr. S. R. Maity, Dr. S. Bhowmik, Dr. B. Das.
  7. Four Days Finishing School on “Industry Ready Programme”, Research & Development , 06/04/2014 – 09/04/2014 , Department of Mechanical Engineering, National Institute of Technology Silchar under TEQIP – II, Coordinator: Dr. A. Ray, Dr. S. Bhowmik, Dr. D. Bhanja.
  8. A Short Term Course on “Joining of Material”, Faculty Development Programme, 09/07/2013 – 13/07/2013, Department of Mechanical Engineering, National Institute of Technology Silchar under TEQIP – II, Coordinator: Dr. S. Halder, Dr. S. Bhowmik.
  9. Two Days Exhibition Workshop on “Miniature Engineering Working Model”, Research & Development, 29/03/2014 – 30/03/2014 , Department of Mechanical Engineering, National Institute of Technology Silchar under TEQIP – II, Coordinator: Dr. S. Bhowmik, Dr. K. N. Das.

 Attended

  1. National Workshop on Machining and Machinability of Advanced Materials, 29 – 30th March 2007, CMERI, Durgapur.
  2. Workshop on Design of Experiments, Kalyani Government Engineering College, 05 – 07th July 2008.
  3. One Week short term course on Failure Analysis of Engineering Materials, 23 – 27th September 2013, NIT, Silchar.
  4. Two days workshop on Photochemical Machining, 03 -04th October 2013, BCDI, Agartala.
  5. One week National FDP on Pedagogy: A Framework for Effective Teaching and Learning Strategies, 7th – 11th May 2014, NIT, Silchar.
  6. Two week ISTE workshop on Fluid Mechanics, 20th – 30th May 2014, IIT, Kharagpur.
  7. One week workshop on Applications of Optimization Techniques in Engineering and Technology, 24th February – 1st March 2017, NIT Silchar.
  8. Short Term Course on Analytical Mechanics and its Applications, 14th – 18th December 2020, IIT Guwahati.

Administrative Responsibilities:

  1. Associate Dean (Research & Consultancy): [January 2023 – January 2025]
  2. Member, (Departmental Post Graduate Committee): [September 2023 – ]
  3. Head of the Department: [October, 2020 – November, 2022]
  4. Faculty In Charge, Purchase: [December, 2016 – January, 2021]
  5. Member Secretary, Departmental Ph.D. Monitoring Committee (DPMC): [June, 2014 – October, 2020]
  6. Member, Departmental Purchase Committee: [July, 2013 – November, 2020]
  7. Nodal Officer, M/O MSME and KVIC: [February, 2021 – ]
  8. Nodal Officer, I-STEM: [January, 2020 – ]

Important Notice